Parallel 6th order/RDS 6.5

Wow. I’m pretty impressed. I’m going to hold on to this for a few weeks and let my coworker rock my 10 inch Dayton while I push this thing really hard and see how it holds up. This RDS Audio 6.5 has nice usable bass from 27-65 HZ in this box. I’m diggin it a lot. Anyone who happens to be in the Tucson AZ area, I’d be happy to give a demo. I’m super excited to push this thing to its limits for the next few weeks and see how it takes my abuse.
 
6D3D20BF-9128-4EC1-A840-CACCB18768F1.jpeg
F0A1C10A-C6E5-4865-AEA8-CDBDDDED882A.jpeg
36663A23-B4D7-404A-9208-DFA65FC581EE.jpeg
647ADFB6-CF93-4CFF-807C-54869F24C09D.jpeg
D704FA57-03C0-4A9D-8173-DB27D589759E.jpeg
 
I wouldnt get too crazy with it.. Its only a 6.5. Keep it up high, dont get too nasty with it man. Youd be putting it along side of the other 3. That type of enclosure can Murder a sub
 
I wouldnt get too crazy with it.. Its only a 6.5. Keep it up high, dont get too nasty with it man. Youd be putting it along side of the other 3. That type of enclosure can Murder a sub
It doesn’t like to play below 30 HZ. I have a -24 db SSF set at 30 along with a limiter that cuts it back when it senses a clipped signal. Effective bandwidth is from 30-65 HZ. Really solid sounding on music. Where you really have to be careful is around the 60-65 HZ area. The sub is only moving about 3 mm at 60 cycles per second, so it’s easy to burn a coil in that little spot with test tones. You can still hear over excursion in a parallel tune, unlike a series tune, where you might not hear over excursion until it’s already jumped it’s gap and caused damage. I had this thing really stinky this afternoon running test tones at my cabin gain frequency. That’s at about 59 HZ.
 
It doesn’t like to play below 30 HZ. I have a -24 db SSF set at 30 along with a limiter that cuts it back when it senses a clipped signal. Effective bandwidth is from 30-65 HZ. Really solid sounding on music. Where you really have to be careful is around the 60-65 HZ area. The sub is only moving about 3 mm at 60 cycles per second, so it’s easy to burn a coil in that little spot with test tones. You can still hear over excursion in a parallel tune, unlike a series tune, where you might not hear over excursion until it’s already jumped it’s gap and caused damage. I had this thing really stinky this afternoon running test tones at my cabin gain frequency. That’s at about 59 HZ.
:LOL: :LOL: 😁:poop:Whats that Smell??😁
 
Activity
No one is currently typing a reply...

Similar threads

Well, they don't sell the CDTs so there is that... I sold electronics (audio) years ago, in a very hi-end environment. one of the emphasis they...
5
725
If you want to do this I'd suggest you buy one of those PAC or Audiopipe 3 way passive crossovers off Amazon to split the signal between the three...
1
972

About this thread

SlugButter

CarAudio.com VIP
Thread starter
SlugButter
Joined
Location
arizona
Start date
Participants
Who Replied
Replies
47
Views
4,432
Last reply date
Last reply from
SlugButter
1000006564.jpg

Mr FaceCaser

    Mar 28, 2024
  • 0
  • 0
1000006569.jpg

Mr FaceCaser

    Mar 28, 2024
  • 0
  • 0

Latest topics

Top