Opinions needed on 8s

[Slo_Ride 5,000+ posts]

OK then, when can I get a pair and how much is gonna cost me?

Can anyone answer this question in reference to the wmd 8's. I'm not saying the DD 1508 is the best 8. I HAVE said thought that I dont have any experience with 8's so if there are 8's that will get louder than two 1508's off of 1500 watts for near the same cost then lets hear it.

 

[grimreper912003 5,000+ posts]

Can anyone answer this question in reference to the wmd 8's. I'm not saying the DD 1508 is the best 8. I HAVE said thought that I dont have any experience with 8's so if there are 8's that will get louder than two 1508's off of 1500 watts for near the same cost then lets hear it.

Email PAP and maybe they can give you a price.

 

[Annnarbor84 5,000+ posts]

Can anyone answer this question in reference to the wmd 8's. I'm not saying the DD 1508 is the best 8. I HAVE said thought that I dont have any experience with 8's so if there are 8's that will get louder than two 1508's off of 1500 watts for near the same cost then lets hear it.

Going to be later on this spring

 

[TnT_Sounds 10+ year member]

Also more coil options to as far as the ohm configuration

 

[GAM3OVR 5,000+ posts]

Idk if i mentioned this or not. But check out this kick *** sub.

Cost = $70 for pair + shipping

Cheapest route to go.

The pair can handle .8 - 1kw.

http://www.apexjr.com/SuperSub.htm

Also, Idk if you want to but a pair of 8W7's should handle 1.5 kw.

 

[Annnarbor84 5,000+ posts]

Interesting on the pair for $70, as for the JL's they are way expensive and better can be had for the price.

 

[bball09124 10+ year member]

But E8's are like half the price and are supposed to stand up to the 1508's pretty well //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

You can't compare the two. The E8 is tiny compared to the 1508.

what about it...i'm building up a custom 8. rated around 3k rms cant wait to actually test it out...should be here early march

I'll paypal you $10 if you design an 8" to handle 3000 watts for 30 seconds on a tone. I'm anxious to see your vid.