New Audio Build 2014 Camry

[Luis G]

Hello, new here. I recently decided to upgrade the stereo system in my car (2014 Camry LE).

I've been doing what I can for research.

I will be keeping the OEM HU. (Entune system from Toyota)

Amplifier:

Crunch 4 Channel 1800W amp (handles 225 watt rms per channel@4 ohms)

Speakers:

2x Pairs of Kenwood 6x9 5 way speakers

Adapter brackets are on the way, should arrive mid week.

2x 3.5" Speakers for the front corner deck. The factory speakers are considered "high power tweeters", two local shops have advised keeping them.

8ga amp kit, 2 RCA interconnects. (8GA power/negative wire, with fuse. Speaker wires etc).

I am still undecided if I will be adding a sub.

Is there anything else I am missing? I believe I also need an Line out converter?

Click to read more...

 

[Papermaker85 5,000+ posts]

Hello, new here. I recently decided to upgrade the stereo system in my car (2014 Camry LE). I've been doing what I can for research.

I will be keeping the OEM HU. (Entune system from Toyota)

Amplifier:

Crunch 4 Channel 1800W amp (handles 225 watt rms per channel@4 ohms)

Speakers:

2x Pairs of Kenwood 6x9 5 way speakers

Adapter brackets are on the way, should arrive mid week.

2x 3.5" Speakers for the front corner deck. The factory speakers are considered "high power tweeters", two local shops have advised keeping them.

8ga amp kit, 2 RCA interconnects. (8GA power/negative wire, with fuse. Speaker wires etc).

I am still undecided if I will be adding a sub.

Is there anything else I am missing? I believe I also need an Line out converter?

you already have the stuff?

 

[Luis G]

you already have the stuff?

Yes.

 

[Papermaker85 5,000+ posts]

Yes.

You more than likely need a woofer but installing the gear as intended. Chances are it will sound decent t but you have alot of room for improvement.

 

[Luis G]

Any suggestions for a subwoofer? I was looking at the Pioneer shallow mount subwoofer.

TSSWX2502

Only to keep it low profile, and not use up as much trunk space.