My Sub went up in flames....literally

gotz the pm //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

i will be glad to help ya out but the problem is you have 2 o these subs and if i recone one it will sound different after taking the china out of it,lol...

dude $50 in recone partslmfao and stiched leads isnt the problem. the problem is poly/cotton spiders because a lead breaks and here is a worn flamable spider rite there that waiting for a good spark...

 
gotz the pm //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gifi will be glad to help ya out but the problem is you have 2 o these subs and if i recone one it will sound different after taking the china out of it,lol...

dude $50 in recone partslmfao and stiched leads isnt the problem. the problem is poly/cotton spiders because a lead breaks and here is a worn flamable spider rite there that waiting for a good spark...
Hmmmmmmmmmmmm, I'm thinkin we take the China outta both of them //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
thats no problem //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
OK, can u PM me and let me know what u 'll need, where to send, time,etc,etc....

I know nothing about rebuilds. Are there things that can be changed or recommended?

**** Drift, This is what happens when you crank up country music in an import car!
-silver240sx
I knooooow!! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

what kind of set up you have, looks like they are install free air
It is not free-air . The subs fire into a box. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
i would just replace both...probably gonna be more money than it's worth
Thats what im afraid of //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
u cant get a decent sub close to what it cost to rebuild...
Truth...

Thanks for the PM //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif will let u know whats up in a day or so //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Haven't forgot about this. I've got a few places to travel this coming week, but will get them out to ya as soon as I get home.

I put a meter on the other sub and it checked out fine...jhowever, upon closer inspection the spider is ripped //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

I beat the crap outta these things :p

couple of questions;

- Will you just replace the coil / spider and leads? Wondering because I dont wanna lose that **** Carbon Fiber cone.

- any advantage or disadvantage to making them single vs. dual voice (2ohm) coil?

you have to PM me your shipping addy too //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Your amp may have failed. A competent shop should be able to diagnose the issue in under 5 minutes either way. You didn't necessarily do...
6
2K
Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
200
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
540
thanks DB, that definitely helps swallowing a $300 price tag 😂 these would essentially be running midbass for me too
12
570

About this thread

DriftGirl

10+ year member
Professional HighSider
Thread starter
DriftGirl
Joined
Location
Seattle
Start date
Participants
Who Replied
Replies
32
Views
3,806
Last reply date
Last reply from
snoopdan
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top