My build!

  • 2
    Participant count
  • Participants list

JakeW

CarAudio.com Regular
All work done myself, I wouldnt say it’s ever show winning quality but never done audio before so I’d say I’m learning! Starting pieces, to most updated pieces- bamf 104 with homemade spacers, with power acoustik 5k but I only had 4ga wire so she burnt up.... then to smart 3, to dc lvl 2, to 1 dc lvl 4.... then to md5000.1 while I wait on dual enclosure. With a jl 360/2 to power 4 doors.
 

Attachments

  • 158E4147-9148-4F07-872C-8EC4E9E68145.jpeg
    158E4147-9148-4F07-872C-8EC4E9E68145.jpeg
    837.9 KB · Views: 181
  • 38CFC44A-0E6F-4410-BF0B-17ACE9063AFF.jpeg
    38CFC44A-0E6F-4410-BF0B-17ACE9063AFF.jpeg
    1.2 MB · Views: 187
  • 0CCD6E9A-4179-4E60-BE33-57A5CA2BFE43.jpeg
    0CCD6E9A-4179-4E60-BE33-57A5CA2BFE43.jpeg
    701.9 KB · Views: 185
  • B371E29C-B959-4F09-A143-38E346DC20C1.jpeg
    B371E29C-B959-4F09-A143-38E346DC20C1.jpeg
    618.2 KB · Views: 179
  • 8674D78E-5D09-4341-B676-358344E16E23.jpeg
    8674D78E-5D09-4341-B676-358344E16E23.jpeg
    1.6 MB · Views: 184
  • 78E12344-ED98-4672-856F-E43589BC4DBB.jpeg
    78E12344-ED98-4672-856F-E43589BC4DBB.jpeg
    639.5 KB · Views: 173
  • 320B2CB3-8881-4121-BE29-91D422A8A2DB.jpeg
    320B2CB3-8881-4121-BE29-91D422A8A2DB.jpeg
    926.4 KB · Views: 172
  • EACF67A5-3F77-4679-9A0D-BA5C0FB7F183.jpeg
    EACF67A5-3F77-4679-9A0D-BA5C0FB7F183.jpeg
    913.6 KB · Views: 184
  • 90E8C044-4E60-4829-9C45-257FAC493CFB.jpeg
    90E8C044-4E60-4829-9C45-257FAC493CFB.jpeg
    618.6 KB · Views: 186
  • 9C2DCA9D-964D-4B5E-9312-C7935E7748B2.jpeg
    9C2DCA9D-964D-4B5E-9312-C7935E7748B2.jpeg
    790.8 KB · Views: 172
Dash to kicker 3.5, rear headliner tweeters to 1” ds18.
 

Attachments

  • B2C2E20C-4DAC-4939-A698-3E37FCEFDBAA.jpeg
    B2C2E20C-4DAC-4939-A698-3E37FCEFDBAA.jpeg
    559 KB · Views: 154
  • C02053A7-3E10-4BAB-BD01-53ECD25DA44C.jpeg
    C02053A7-3E10-4BAB-BD01-53ECD25DA44C.jpeg
    993.9 KB · Views: 161
And of course big 3 done with 1/0 ofc, with alternator upgraded to 326a. Sits on a cold day @14.8v, bumps hard not showing less than 13.9 or so on 1 lvl 4.
 
When companies want upwards of $100, some $200 for a t-harness to plug in behind the head unit to give you signal for the amp... you buy the $5 high level plug and tap the rears to get your own! #rcas are for noobs haha
 

Attachments

  • 7F10980A-9FC6-4139-9118-BC3E7DEBA250.jpeg
    7F10980A-9FC6-4139-9118-BC3E7DEBA250.jpeg
    809.2 KB · Views: 157
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
607
I got to message a DD woofer builder a decent bit my last stent of box designing; they would send me designs to do for or with individual...
5
553
Currently Audison amps 500.1 and 4.300 with kappa 90csx 6x9 component set. Pair of morel 6.5 rear and a single 10” alpine type R.
7
609
Crutchfield can tell you what speaker will fit your car. for subs, Image Dynamics and Adire are still around. my last sub i bought was from...
3
658

About this thread

JakeW

CarAudio.com Regular
Thread starter
JakeW
Joined
Location
Thornton co
Start date
Participants
Who Replied
Replies
8
Views
1,042
Last reply date
Last reply from
JakeW
1000006564.jpg

Mr FaceCaser

    Mar 28, 2024
  • 0
  • 0
1000006569.jpg

Mr FaceCaser

    Mar 28, 2024
  • 0
  • 0

Latest topics

Top