my alero build problem

art
10+ year member

Junior Member
10
0
nebraska
hello all i am going to build a custom box for my alero. it will be 2 boxes formed to the bottom of the trunk in glass and wood for the top. they will be about 4 cubic feet with 2 4" ports each. my problem is i dont know where to place my subs and ports so it will be loudest for competition. i know it was pretty loud with the subs facing the back and the ports on the opposite side of the box facing into the car. but i read that the ports need to be facing the same way as the subs. i am just plain confused. please help

 
Subs firing forward, port firing to the passenger side got me doing 139.9 in bass race with a pair of 12s and 300 watts total in my g/fs alero //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Subs firing forward, port firing to the passenger side got me doing 139.9 in bass race with a pair of 12s and 300 watts total in my g/fs alero //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
so the port was on the side of the box on the side to the right of the subs?

 
You have the wrong vehicle for competition (trunk car; very difficult to SPL)

Do the rear seats fold down in an Alero?

 
For a competition set-up I would face all forward with the largest port area you can cut

The box will probably take most of the trunk

For Cruz around bass face all back

 
yeah i think i am going to go with port back subs back and angled a little. i am going to build a square box and move it around in the car first i think. thanks everyone for your help

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
839
https://www.youtube.com/@therealmatty_s/videos
0
501
I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
995
I got to message a DD woofer builder a decent bit my last stent of box designing; they would send me designs to do for or with individual...
5
864
Currently Audison amps 500.1 and 4.300 with kappa 90csx 6x9 component set. Pair of morel 6.5 rear and a single 10” alpine type R.
7
924

About this thread

art

10+ year member
Junior Member
Thread starter
art
Joined
Location
nebraska
Start date
Participants
Who Replied
Replies
13
Views
693
Last reply date
Last reply from
art
1715565471722.png

Doxquzme

    May 12, 2024
  • 0
  • 0
IMG_5880.jpeg

Brendon Jenness

    May 11, 2024
  • 0
  • 0

New threads

Top