my alero build problem

art
10+ year member

Junior Member
10
0
nebraska
hello all i am going to build a custom box for my alero. it will be 2 boxes formed to the bottom of the trunk in glass and wood for the top. they will be about 4 cubic feet with 2 4" ports each. my problem is i dont know where to place my subs and ports so it will be loudest for competition. i know it was pretty loud with the subs facing the back and the ports on the opposite side of the box facing into the car. but i read that the ports need to be facing the same way as the subs. i am just plain confused. please help

 
Subs firing forward, port firing to the passenger side got me doing 139.9 in bass race with a pair of 12s and 300 watts total in my g/fs alero //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Subs firing forward, port firing to the passenger side got me doing 139.9 in bass race with a pair of 12s and 300 watts total in my g/fs alero //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
so the port was on the side of the box on the side to the right of the subs?

 
You have the wrong vehicle for competition (trunk car; very difficult to SPL)

Do the rear seats fold down in an Alero?

 
For a competition set-up I would face all forward with the largest port area you can cut

The box will probably take most of the trunk

For Cruz around bass face all back

 
yeah i think i am going to go with port back subs back and angled a little. i am going to build a square box and move it around in the car first i think. thanks everyone for your help

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
1K
https://www.youtube.com/@therealmatty_s/videos
0
589
I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
I got to message a DD woofer builder a decent bit my last stent of box designing; they would send me designs to do for or with individual...
5
941
Currently Audison amps 500.1 and 4.300 with kappa 90csx 6x9 component set. Pair of morel 6.5 rear and a single 10” alpine type R.
7
1K

About this thread

art

10+ year member
Junior Member
Thread starter
art
Joined
Location
nebraska
Start date
Participants
Who Replied
Replies
13
Views
694
Last reply date
Last reply from
art
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top