MTX 9510 Problem

[90accordman 5,000+ posts]

well so far so good working on coat 2

 

[imfrumthawest 10+ year member]

beginning pics

bro, that's cast aluminum. you might as well trash it unless you got mad welding skills like me. even then it's not worth it.

 

[imfrumthawest 10+ year member]

at least make sure that the magnet is supported so there no weight on the rim. but even then i think after bangin a while it'll crack again.

 

[imfrumthawest 10+ year member]

Shit didnt look that bad in the pics. Anyway to put some jbweld on the inside of the spoke for more support?

nice fuking avatar pimp! i like that.

 

[90accordman 5,000+ posts]

i know what it is, and wouldnt waste my time welding it,

its 5 bucks if it dont work whoopy i wasted 2 energy drinks... like i need them anyhow

 

[Wkbdkid 10+ year member]

looks good. Does it seem to be holding?

 

[90accordman 5,000+ posts]

welp i just woke up and went to lift it off the counter.....

it held

so it took it over to my couch and started yanking on it as in holding the whole sub by the baffle and pulling and it stayed . so later i'll do a 3rd coat of jb and probably call it done

 

[Wkbdkid 10+ year member]

*****in. JB Weld FTW

 

[imfrumthawest 10+ year member]

i know what it is, and wouldnt waste my time welding it,
its 5 bucks if it dont work whoopy i wasted 2 energy drinks... like i need them anyhow

dont get mad buddy. just trying to help. word to your mother.

 

[audioholic 5,000+ posts]

bro, that's cast aluminum. you might as well trash it unless you got mad welding skills like me. even then it's not worth it.

Yeah I bet you are great at welding cast aluminum.

 

[imfrumthawest 10+ year member]

Yeah I bet you are great at welding cast aluminum.

thanks, i'm actually a bad *** welder. mig, tig, arc, and torch. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[audioholic 5,000+ posts]

thanks, i'm actually a bad *** welder. mig, tig, arc, and torch. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

So explain the process you would use to weld it. Just tig it? //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[imfrumthawest 10+ year member]

So explain the process you would use to weld it. Just tig it? //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

no not cast, too many impurities in cast so you'll pop holes in that sob. i'd either use aluminum spool from the mig with helium or alum. rod. then grind smooth. quit testing me.

 

[jco1385 5,000+ posts]

no not cast, too many impurities in cast so you'll pop holes in that sob. i'd either use aluminum spool from the mig with helium or alum. rod. then grind smooth. quit testing me.

bullshit *******

 

[imfrumthawest 10+ year member]

bullshit *******

your mama's sweet *******.