Master's New Build! 2 HDC15-A W/ XXV Maxximus

MasterOfAllBass
10+ year member

Team Minnesota's Loudest
2,516
0
Minnesota
Ok, Here we go again! This one is a killa! This is a DAILY DRIVER!

2 AQ HDC15-A Sub's

1 Hifonics XXV-MAXXIMUS @ 1 Ohm

5.5 Cb Feet After Dissplacments W/ 2 6'' Aero Ports @ 38Hz

6 Kinetik HC1800 In Back W/ 2 4 Foot 1/2'' Thick by 2'' Wide Buss Bars!

1 DC Power XP 270 Amp Alt W/ 3 Runs of 0 gauge off each of the alt + & -

6 Runs Of Power and Negative (0 Gauge)

Big 3 (0 Gauge)





















 
Very very nice... This thing should be a beast. Isn't the maxximus just 2 goliaths in the same case??

Also didn't know those woofers could handle that kind of power for daily.

 
Very very nice... This thing should be a beast. Isn't the maxximus just 2 goliaths in the same case??
Also didn't know those woofers could handle that kind of power for daily.
iv seen the coppers take that power daily. The key is very small box. Yes its got crazzy loud. LIke 153+ TL Music. So my Alums should be able to. Ill have to see //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

 
what the hell happened to yur old build, and why ditch 4 subs and the aq amps?
cuz i got pissed that my aq amps keep ****ing up, sorry dj. And this build ill be in a lower class with bigger numbers then my last system. You will all see. //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 
what the hell happened to yur old build, and why ditch 4 subs and the aq amps?
ohh and this amp puts out 2k rms more then 4 2200d //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
my AQ amps/HDC's work just fine and get rather loud for daily. You just seem to be plauged with one problem after another. Kind of like how I started this year.

Although I forsee problems with you trying to play full tilt for extended periods and killing the subs, but hopefully you'll prove me wrong...

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
1K
https://www.youtube.com/@therealmatty_s/videos
0
670
I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
I got to message a DD woofer builder a decent bit my last stent of box designing; they would send me designs to do for or with individual...
5
1K
Currently Audison amps 500.1 and 4.300 with kappa 90csx 6x9 component set. Pair of morel 6.5 rear and a single 10” alpine type R.
7
1K

About this thread

MasterOfAllBass

10+ year member
Team Minnesota's Loudest
Thread starter
MasterOfAllBass
Joined
Location
Minnesota
Start date
Participants
Who Replied
Replies
445
Views
31,528
Last reply date
Last reply from
boostNbeer
Screenshot_20240611-211145.png

Blackout67

    Jun 11, 2024
  • 0
  • 0
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0

New threads

Top