Looking for Loudness?

[MisterGrubbs 5,000+ posts]

I hate to say it

But two HDC' with copper coils

 

[DJ Nitrous 427 10+ year member]

yea...thats sounds good to me

 

[king ranch 5,000+ posts]

I hate to say it
But two HDC' with copper coils

just curious how much power can those handle a piece daily

 

[Gilliz 10+ year member]

2 l7's will get you loud. Closest you will come to SQ is turning the volume down.

1000 a piece is good. Peak is 1500.

 

[Gilliz 10+ year member]

Measure your trunk so people can help you further.

 

[DJ Nitrous 427 10+ year member]

just curious how much power can those handle a piece daily

MatrxxDude had a pair of the AmeicanBass 15" version on an IA40.1

 

[BumpInDaTrunk 10+ year member]

well the problem I'm having with L7s is its recommended rms is 600w in ported rather then 750 in sealed. also, they only have a frequency of 20-100hz. Two of them would handle 1,200w rms to run properly and they wont hit any mid-bass at all.

whats hdc btw?

 

[DJ Nitrous 427 10+ year member]

you dont wnat them to play midbass

 

[king ranch 5,000+ posts]

wat are u talking about man you dont use subs for midbass most people use a sub for is 80hz and under you want your subs to hit low notes

and people run 12's ported on 1000 easily they can take some power i am giving mine 800 each ported in a 5.2cu ft box tuned to 34hz and they get loud and handle it with no problem

 

[king ranch 5,000+ posts]

like i said in the above post get 2 dual 4ohm subs and wire them up to 1ohm and give them around 800-1000rms a piece in a low tuned ported box and they will please you

when i had mine only getting 425rms a piece they were still loud and then when i doubled the power it was crazy

 

[BumpInDaTrunk 10+ year member]

lol im just used to my old first pair of kenwoods.

 

[TurdFergueson2 5,000+ posts]

just curious how much power can those handle a piece daily

Your XPLOD amp couldn't handle a pair of those.

 

[dvrmstrng 5,000+ posts]

where in jersey

 

[king ranch 5,000+ posts]

lol im just used to my old first pair of kenwoods.

well first go measure your trunk to see how much space u have

measure width height and depth

 

[SSS 18734 5,000+ posts]

well the problem I'm having with L7s is its recommended rms is 600w in ported rather then 750 in sealed. also, they only have a frequency of 20-100hz. Two of them would handle 1,200w rms to run properly and they wont hit any mid-bass at all.
whats hdc btw?

A ported enclosure typically provides for better power handling, especially with SPL-oriented subs. A pair on that amplifier would match well. And you don't want them playing over ~80hz.

HDC is Audioque's line of subwoofers.

Audioque.com - You'd probably be better of with their 2.5's