looking for 900-1200wrms @ 1ohm

Of course there are always going to be product biased suggestions but if you are at all interested in SQ, get an A/B Class amplifier whether it is ours or any other companies.

At 1000 watts, you will not be over taxing your battery and the differance in current draw from a D-Class to an A/B is not significant and of course an A/B will sound far superior to a D-class.

1-2% THD & N D-Class is a far cry from .05% THD & N from an A/B-class.

 
Nine.1 is a great amp, as is that Sundown.

I have an amp that is very similar to the Sundown, it's an RD 1000.1, you can expect a little more than 1000w rms out of her

I'll let her go for 200 or under, send me a PM if you're interested. Cosmetics 8.5/10 and 100% functional no questions asked

And I can get you as much feedback as you'd like.

 
Of course there are always going to be product biased suggestions but if you are at all interested in SQ, get an A/B Class amplifier whether it is ours or any other companies.
At 1000 watts, you will not be over taxing your battery and the differance in current draw from a D-Class to an A/B is not significant and of course an A/B will sound far superior to a D-class.

1-2% THD & N D-Class is a far cry from .05% THD & N from an A/B-class.


My Sundown runs at .01% THD

//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 
Nine.1 is a great amp, as is that Sundown.
I have an amp that is very similar to the Sundown, it's an RD 1000.1, you can expect a little more than 1000w rms out of her

I'll let her go for 200 or under, send me a PM if you're interested. Cosmetics 8.5/10 and 100% functional no questions asked

And I can get you as much feedback as you'd like.
nine.1 is too much power at 1 ohm

 
My Sundown runs at .01% THD
//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif
From there web site:

Double Sided Through Hole Epoxy PCB

Daisy-Chain Through Output RCA

Efficiency : 86% @ 4 ohm, at 100Hz

24dB/Oct Variable Crossover

Multi-Way Protection Circuitry

(Thermal/Over Current/Speaker Short/Speaker DC Protection)

Variable Subsonic Filter

Variable Bass Boost

Variable Low Pass Filter

Variable Phase Shift

Zero(0) Gauge Power Supply Connectors

Tested Voltage & THD : 14.4V & Less than 1% THD

Operating Voltage : DC 10V~16V

Digital Class-D Linkable Mono Block Amplifier

1 Ohm Stability

RCA Line Input and Master Output

24dB Octave Crossover Slope

Wired Remote Controller

 
From there web site:
Double Sided Through Hole Epoxy PCB

Daisy-Chain Through Output RCA

Efficiency : 86% @ 4 ohm, at 100Hz

24dB/Oct Variable Crossover

Multi-Way Protection Circuitry

(Thermal/Over Current/Speaker Short/Speaker DC Protection)

Variable Subsonic Filter

Variable Bass Boost

Variable Low Pass Filter

Variable Phase Shift

Zero(0) Gauge Power Supply Connectors

Tested Voltage & THD : 14.4V & Less than 1% THD

Operating Voltage : DC 10V~16V

Digital Class-D Linkable Mono Block Amplifier

1 Ohm Stability

RCA Line Input and Master Output

24dB Octave Crossover Slope

Wired Remote Controller

Yeah, I looked that up after i stated that //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

My 100.2 was .01% I guess i thought they all were!

My bad.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

ballistik101

10+ year member
Senior VIP Member
Thread starter
ballistik101
Joined
Location
Los Angeles, CA
Start date
Participants
Who Replied
Replies
18
Views
1,532
Last reply date
Last reply from
Team Maxxsonics
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top