Ok so after some trial and error it seems like the subwoofer RCA on my pioneer p4100dvd aren't working. However there is still some output from the sub, just not enough. So my question is would a line driver work to boost the signal to an acceptable level?
-
2Participant count
-
Participant list
maylar 10+ year member
Electrical Weenie
One of the few cases where a line driver/preamp is needed is when the preouts don't have enough level to drive the amp to the desired level. I have the same problem and solved it with a preamp.
Activity
No one is currently typing a reply...
Similar threads
The preamp input on most amps is 10-20k ohms, so you don't really lose voltage. I've run plenty of systems off 2v preamps with no problems.
- Started by toddington
- General Car Audio
The correct answer is yes, you want both left and right so you get low end information from both channels. It is very common for recording...
- Started by AudioArchitech
- Wiring, Electrical & Installation
only one way to find out. thanks for the input.
- Started by RMDecker
- Wiring, Electrical & Installation
About this thread
New threads
-
Another VS ThreadLooking to go for a cheap SQL build in the back of my Jeep...
- Started by Blackout67
- Replies: 1
-
Running two pairs of component speakers activeHello everyone. I need some advice. I am considering...- Started by 6r33n3y3z
- Replies: 9
-
Im trying to hook up a 4 channel ampI currently have a stock head unit with stock amp with jbl...- Started by William Melcic
- Replies: 2
-
Chrysler 300 Dual Battery/350A ALT Connection Help Needed.Hello, New member here. Intermediate knowledge, four...- Started by Virtuous Warrior
- Replies: 3
-
21 Ram 1500Ill try to keep it short. “Base 6 speaker system”. I upgraded...- Started by Dylansnut
- Replies: 1