I just purchased and installed an audiocontrol overdrive. I heard that installing it in the back would work so I did. I just crammed the power wire into my amps 0 gauge power, and the ground to where my amp was grounded, and spliced the remote turn on wire. Anyways, it boots up and shows there is power with the red light, but the 2, 5, 7.5, and maximized lights that show the voltage output do NOT turn on like they are supposed to. I'm pretty sure I did my wiring right because it turns on. Also, when my audio is playing, I still can hear the subwoofer playing and the gain on the audiocontrol and the amplifier have an effect on it. Please help me if I did something wrong.
