how many batts should i get for...

[j3bus2k3 5,000+ posts]

all my batts will be in the rear, including the start battery. wont be anything under the hood except for alternators.

I'd still do 2 runs from each alt to the batts in the back and thats already 50'...

eh...going to be close. I'd get an extra 50'. Better to have too much than not enough...

 

[iamamp3pimp 5,000+ posts]

then he can sell to be on teh cheap.

 

[iamamp3pimp 5,000+ posts]

scott u have any idea where ic an find 7 inch grilles at?

 

[pimpedout97x]

^lol^

i forgot to say this guys-

not all 5 of those amps will be on at the same time, and if so, will be for a min or so. amps up front will be one hk898, hk598, and hk298.

the other hk898 and hk398 will be for the mids and horns out back, and will be on a switch and only turned on at meets, etc.

so really its only the 3 amps daily (hk898, hk598, hk298)

 

[iceteebone 5,000+ posts]

^lol^
i forgot to say this guys-

not all 5 of those amps will be on at the same time, and if so, will be for a min or so. amps up front will be one hk898, hk598, and hk298.

the other hk898 and hk398 will be for the mids and horns out back, and will be on a switch and only turned on at meets, etc.

so really its only the 3 amps daily (hk898, hk598, hk298)

well you still gotta wire them, or are they decorations? if you wanted decorations i would've went with audiobahn since they chrome and have flames

 

[iamamp3pimp 5,000+ posts]

they will be wired, with the REM to a switch to turn them on/off.

 

[pimpedout97x]

correct. so techincally only 3 will be used a majority of the time, the other 2 are for the back speakers behind the wall which will hardly get used but im still a hardhead and wasted money on them anyways.

 

[ngsm13 5,000+ posts]

I'd say you need 150 foot of 1/0 to be safe.

I did Triple (+) runs from front to back. Dual runs for Big3. Triple frame ground front and rear. And 1/0 +/- for two monoblock amps. This is in a Extended Cab truck, and completely used my 2 50 foot rolls of HyperFlex.

//content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

Also, mids and high. I'd say at least 100ft, if not 150 also.

nG

 

[iamamp3pimp 5,000+ posts]

correct. so techincally only 3 will be used a majority of the time, the other 2 are for the back speakers behind the wall which will hardly get used but im still a hardhead and wasted money on them anyways.

I told him not to do it.

 

[pimpedout97x]

Also, mids and high. I'd say at least 100ft, if not 150 also.

nG

i got 100ft of 16ga, i think thatll be more than enough becuase each mid gets wired to itself (parallel) so is only 1 long run to the amp, not each mid to the amp.

 

[thylantyr 10+ year member]

didnt really want to post cuase its just going to turn my thread to shit but oh well.

oh, ya im gonna have a seperate 16v alt for the 4000Ds for sure.

To run that 'front stage' you can use a 100A ALT, but overkill is nice so

anything >100A is a bonus. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ngsm13 5,000+ posts]

i got 100ft of 16ga, i think thatll be more than enough becuase each mid gets wired to itself (parallel) so is only 1 long run to the amp, not each mid to the amp.

Werd.

I'd invest in some small distrobution blocks for each door or something. Lawl.

nG

 

[ngsm13 5,000+ posts]

How are you bandpassing the 10's, and also bandpassing the 6's?

nG

 

[iceteebone 5,000+ posts]

How are you bandpassing the 10's, and also bandpassing the 6's?
nG

with his 880 //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

that's how the ghetto ballers roll

 

[pimpedout97x]

i should be able to use the 880 to cross it over right?