GM RVC need help

  • 1
    Participant count
  • Participant list

BSundownZteam

CarAudio.com Newbie
1
0
Iowa
Recently installed a sundown x6.5 on a sfb 1000 in my brothers Buick Lucerne. It was working great for about 2 months beating hard and I had the gain set fine but couldn’t get my brother to understand not to turn the head unit up to get more power out of the amp and he said whatever so now all it does is make a humming noise with output through the amp even without rcas plugged in. The subs cone like slowly gets ****** in to the motor while this happens too. I don’t know if it has something to do with gms regulated voltage control and having a lot of fluctuation in voltage to the amp? I thought it would be fine just a 4ohm load like 500 watts shouldn’t be enough to cause something like this?
 
Activity
No one is currently typing a reply...

Similar threads

How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
150
While most Asian and African markets will identify Honda's small hatchback as the Jazz model, most Western regions will know the same model as the...
2
111
The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
456
Yup , the dsp should have input sections, it may have one for sub? Hu to dsp. Dsp to amps, amps to speakers. Probably help you to draw this all...
2
351

About this thread

BSundownZteam

CarAudio.com Newbie
Thread starter
BSundownZteam
Joined
Location
Iowa
Start date
Participants
Who Replied
Replies
0
Views
509
Last reply date
Last reply from
BSundownZteam
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top