Fuse problem. PLZ help

[bama350z 10+ year member]

I just got a Memphis 1500D amp for my diamond audio m6 10" sub installed and I am running it with 4 ga wire at 4 ohms.....all of a sudden, no more bass....no pop, no nothing it just cut out during a song....i hope this is a fuse problem...what do ya'll think?? Thanks.

Click to read more...

 

[negativezeroz 5,000+ posts]

did you check fuse going to battery? inline with power..I blew mine installing my 601.1..but im not an expert so someone else will help ya if that isnt it..

 

[johnecon2001 5,000+ posts]

why dont you check first and then ask what questions you have.

 

[SPL140.2 5,000+ posts]

Might be a fuse, running your amp at 4ohms shouldnt have caused your fuse to blow. If your fuse is blown you may have a short somewhere check your wires. check all your fuses dont forget the amp fuse. If there fine, might have a problem with sub, amp, hu.

 

[bama350z 10+ year member]

yeah, it was the fuse from the battery, just wanted to check the list of things it could have been . Thanks guys, bama350z