Nico Koutouzis
10+ year member
Senior VIP Member
Alright guys my dad has a g35 coupe and I wanted to replace all his stock speakers and add two ten inch type r's to the trunk. I have a few questions.
1.) I am doing the big3 I found a DIY (g35 coupe specific) on it and it seems fairly easy.
2.) The cars stock amps coming from the alternator is 110 amps and I am almost possitive I need to get a HO alty for 1800w rms of power including the three tv's in the car the previous owner had installed.
3.) reasoning is because all the stock speakers sound like **** because the guy who owned the car decided it woud be a good idea to amplify stock speakers.
My shopping cart as of now:
I am open to any opinions
Products
2
Alpine SWR-1043D
1
Alpine SPR-17S
1
Alpine SPR-13S - these are 5.25 components going to be powered by bridging the small kicker amp already installed)
1
Alpine SPR-69C
1
Sound Storm SSL F4.1200- 110w rms x 4 channels at 4 ohms for speakers (powering 6.5's and 6x9)
1
Rockford Fosgate CP4CKDS-4 gauge amp kit for speaker amp. (only reason i chose RF is because it is a free upgrade to a kicker kit on sonic electronix)
1
Sound Storm (SSL) F3600D- monoblock amp rated at 1200 w rms at 4 ohms for the subs
1
db Link PK0RZ -0 gauge wire kit for sub amp
-Just copied the e-mail I sent to myself.
The enclosure I am buying is from zenclosures.
Head Unit is the w900 from alpine.
The firewall has already been drilled through because there is a kicker amp in the back that I just found yesterday haha.
Any tips on how much power I need? things like that? I dont know the battery I have because I am out of town right now.
1.) I am doing the big3 I found a DIY (g35 coupe specific) on it and it seems fairly easy.
2.) The cars stock amps coming from the alternator is 110 amps and I am almost possitive I need to get a HO alty for 1800w rms of power including the three tv's in the car the previous owner had installed.
3.) reasoning is because all the stock speakers sound like **** because the guy who owned the car decided it woud be a good idea to amplify stock speakers.
My shopping cart as of now:
I am open to any opinions
Products
2
Alpine SWR-1043D
1
Alpine SPR-17S
1
Alpine SPR-13S - these are 5.25 components going to be powered by bridging the small kicker amp already installed)
1
Alpine SPR-69C
1
Sound Storm SSL F4.1200- 110w rms x 4 channels at 4 ohms for speakers (powering 6.5's and 6x9)
1
Rockford Fosgate CP4CKDS-4 gauge amp kit for speaker amp. (only reason i chose RF is because it is a free upgrade to a kicker kit on sonic electronix)
1
Sound Storm (SSL) F3600D- monoblock amp rated at 1200 w rms at 4 ohms for the subs
1
db Link PK0RZ -0 gauge wire kit for sub amp
-Just copied the e-mail I sent to myself.
The enclosure I am buying is from zenclosures.
Head Unit is the w900 from alpine.
The firewall has already been drilled through because there is a kicker amp in the back that I just found yesterday haha.
Any tips on how much power I need? things like that? I dont know the battery I have because I am out of town right now.
