FierceTimbo's SQ Build Log

[WOT]

I would think it would take more time to glue a holder to the firewall then it would to whip 2 screws into it and have it finished and over with

 

[Megalomaniac 5,000+ posts]

if you need a third set of ears, im all yours //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Fiercetimbo17 10+ year member]

I would think it would take more time to glue a holder to the firewall then it would to whip 2 screws into it and have it finished and over with

Well i do not blindly shoot screws into anywhere, so to make sure there was nothing to screw into and then mount it that would take more time...

 

[Fiercetimbo17 10+ year member]

Im on my laptop tuning as we speak, so far ive only really decided on starting crossover points and played with phase, im going to try to get a little eqing done before i get tired.

Hopefully i will have everything back in the car and ready to finish the flase floor and IB deck as soon as im done with the cobalt im building, maybe before depending on how i feel.

 

[Fiercetimbo17 10+ year member]

To fix the sagging of the baffle im going to weld up a support and glass it into the baffle, which will also bolt into the car, ill update with pics when i get to it.

 

[Fiercetimbo17 10+ year member]

I decided on some new midbasses, going with a DLS ir8 so im going to be chopping up the doors tomorrow.

Luckily i have an extra set of door panels in the garage so if i dont like them i can do something else.

 

[Fiercetimbo17 10+ year member]

I have a little update,

Finally got around to doing some stuff, didnt take pictures as i only had a little bit to do it, i didnt even get to prime and seal the mdf rings, i just wanted to get them installed for a drive i had to make last night

Door panels are cut as well, just need to finish them up.