EQ Setting

Gregulate
10+ year member

Senior VIP Member
Just hooked up an EQX to my car(thanks to Louisiana_CRX for the hookup) and have been messing with how to set it up. I just spent the last hour looking online and through this forum to find a tutorial and haven't found much.

I started with everything flat and went from there, but I am not sure I am doing it right. It starts to sound better, but the highs are a bit forceful.

I found an interactive page, but it's an eye-chart: Interactive Frequency Chart - Independent Recording Network

I'd like something that says, if the guitar is too much, try this freq setup, etc.

Here's what I have so far:

IMG_0757.JPG


Any suggestions?

Thanks as always.

 
an RTA is going to be your best bet for adjustment out side of that i'd turn everything completely down and start at your highest frequency and work your way down. you can't say that X hz frequency is for a guitar b/c so many other instruments produce that same frequency.

 
Just get test tones and use the EQ to cut the frequencies that seem too loud. IMO do not ever boost anything with an EQ, simply attenuate the overbearing ones to get a smooth response.
That seems to make the most sense. That way I know what I'm listening to and I adjust to how I like it. Funny how I've read that using tones is best so many times and it JUST now made sense.

Found this as tone source:

Realm of Excursion

 
EQ settings are really a personal preference.

Some people like a completely "flat" sound to reproduce the music exactly as it was produced in the studio or on CD.

Some people prefer a boosted mid and boosted high frequency range. Some prefer boosted bass. My wife prefers boosted bass and sound slightly faded to the rear of all things (which I can't stand). Its all preference.

Start with a flat tuning and play music that you normally listen to. If you tune it for classical and you play heavy rap, it probably won't sound right. Same with heavy metal/modern rock compared to classic rock. Completely different sounds. Setting it close to flat and fine tuning for the best sound on your particular speakers is usually the best compromise.

Its almost always better to "cut" a frequency than to boost one. For instance, If you find yourself needing more treble, try cutting the band directly below it a little at a time. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
The first rule in tuning an EQ is to ALWAYS cut FIRST, boost LAST.

Do you have a smart phone?

If so, download the app titled RTA analyzer. It's not perfect, but it will get you headed in the right direction.

Just use a pink noise track, set your volume to 90dB as a reference point. There's also an SPL app too, also not the greatest, but helps none the less.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Gregulate

10+ year member
Senior VIP Member
Thread starter
Gregulate
Joined
Location
austin texas
Start date
Participants
Who Replied
Replies
15
Views
3,209
Last reply date
Last reply from
BnGRacing
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0
IMG_2118.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top