Drown out mids and highs?

[SunUpNeverdown]

I’m learning as I go. Trial and error

 

[SunUpNeverdown]

I can get cerwin Vega v4 2ways with 1” tweeters

 

[SunUpNeverdown]

Because it’s hard for me to find 5x7s or 6x8s that are really good. Do u know any that are good with 1” tweeters?

 

[Jeffdachef 5,000+ posts]

So would I be better off getting a 2 way coaxials that has a 1” tweeter that matches the size of my super tweeters?

no, you are better off with dedicated midrange/midbass drivers with high sensitivity ratings and just the super tweets. No coaxials if you plan on using super tweets. Again coaxials have tweets on them super tweets are tweets, they play the same frequencies buy they reproduce those frequencies differently and they are in different locations which is an acoustical hell of a mess.

 

[Jeffdachef 5,000+ posts]

Because it’s hard for me to find 5x7s or 6x8s that are really good. Do u know any that are good with 1” tweeters?

make your own adapters to fit 6.5s. All the 5x7 and 6x8 offerings are pretty garbage quality. Legit nothing good on the market for those speaker sizes.

 

[Jeffdachef 5,000+ posts]

bridge your rockford amp to these, they'll handle every bit of that rockford 2 channel bridged mode.

Home

PRV Audio 6MR500-NDY-4 6-1/2" Neodymium Midrange Woofer 4 OhmThe 6MR500-NDY-4, from PRV Audio, is made to be a class-leading midrange woofer in the pro audio realm, as well as high output car and home audio, thanks to high-power neodymium radial slugs that immerse the voice coil in a strong...

www.parts-express.com

then get a 100 x 2 channel amp for the super tweets and voila you'll be golden.

 

[SunUpNeverdown]

What do I do with a crossover? I have an x’over on my hu for front rear and subwoofer

 

[SunUpNeverdown]

bridge your rockford amp to these, they'll handle every bit of that rockford 2 channel bridged mode.

Home

PRV Audio 6MR500-NDY-4 6-1/2" Neodymium Midrange Woofer 4 OhmThe 6MR500-NDY-4, from PRV Audio, is made to be a class-leading midrange woofer in the pro audio realm, as well as high output car and home audio, thanks to high-power neodymium radial slugs that immerse the voice coil in a strong...

www.parts-express.com

then get a 100 x 2 channel amp for the super tweets and voila you'll be golden.

Those are out of stock though

 

[SunUpNeverdown]

And what type of amp do u recommend for the tweeters? Brand and model?

 

[SunUpNeverdown]

I can only bridge it at 4ohms. I would need 8 ohm mid bass drivers

 

[SunUpNeverdown]

Bridged At 4 ohms it’s 150x2. It is not stable at 2 ohms bridged

 

[SunUpNeverdown]

I found some good 8 ohm drivers at parts express. But what amp would u put on the tweeters?

 

[Jeffdachef 5,000+ posts]

I can only bridge it at 4ohms. I would need 8 ohm mid bass drivers

no you need 4 ohm drivers because your final minimum impedance is 4 ohms. amazon has those same speakers. All you need to do is focus the front stage. As for your tweeter amp you can just get a pioneer gm 8704, its a 4 channel but its cheap as most good 2 channel amps with a lot of power left over and extra channels for anything you want and its 1 ohm stable so 2 channel bridged easy. the previous gen tested at 120 x 4 rms on the amp dyno so more power than your rockford.

Amazon.com: PRV Audio 6MR500-NDY-4 Neodymium 6.5" Mid Range 4 ohms Pro Audio Speaker 96dB 250 Watts RMS 2" VC: Musical Instruments

Buy PRV Audio 6MR500-NDY-4 Neodymium 6.5" Mid Range 4 ohms Pro Audio Speaker 96dB 250 Watts RMS 2" VC: Monitor, Speaker & Subwoofer Parts - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

 

[Popwarhomie 5,000+ posts]

You know you can edit post and add more to it right? That way you don't have 5 replies in a row with 6 words.

 

[SunUpNeverdown]

no you need 4 ohm drivers because your final minimum impedance is 4 ohms. amazon has those same speakers. All you need to do is focus the front stage. As for your tweeter amp you can just get a pioneer gm 8704, its a 4 channel but its cheap as most good 2 channel amps with a lot of power left over and extra channels for anything you want and its 1 ohm stable so 2 channel bridged easy. the previous gen tested at 120 x 4 rms on the amp dyno so more power than your rockford.

Amazon.com: PRV Audio 6MR500-NDY-4 Neodymium 6.5" Mid Range 4 ohms Pro Audio Speaker 96dB 250 Watts RMS 2" VC: Musical Instruments

Buy PRV Audio 6MR500-NDY-4 Neodymium 6.5" Mid Range 4 ohms Pro Audio Speaker 96dB 250 Watts RMS 2" VC: Monitor, Speaker & Subwoofer Parts - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

But I’ll have 4 4 ohm loads that need to be ran on 2 channels since it’s being bridged on the 4 channel amp. U can only bridge 4 4 ohm loads to 8ohmX2 and 2ohmX2