Cd player Problem

[ColbyJack14 10+ year member]

Ok well your amp remote turn on wire is hocked up to power antenna wire and thats why you get no sound. Now the harness that ypu use for that car comes with a seperate remote turn on harness that you have to pin in the harness to use, and who ever installed the radio never installed it. (It was not an error on the installer it just was not needed for what the person was doing) To save you a bunch of time just cut the power antenna turnon wire at the radio havess and tap it into your acc wire (the red wire). You can test this as well before you do it to make sure it works but take a shot piece of wire and tap it into your amp turn on wire and the other end into the acc wire (red wire). If it works (which it shold then just follow the direction I gave you. Please, please make sure you use electrcal tape on your connection. Do not leave bare wire exposed.

alright ill try that thanks alot if it dont work ill get back to you later ...

 

[Mike465 10+ year member]

Yeah no problem man. Just PM me if that does not work.

 

[ColbyJack14 10+ year member]

Ok well your amp remote turn on wire is hocked up to power antenna wire and thats why you get no sound. Now the harness that ypu use for that car comes with a seperate remote turn on harness that you have to pin in the harness to use, and who ever installed the radio never installed it. (It was not an error on the installer it just was not needed for what the person was doing) To save you a bunch of time just cut the power antenna turnon wire at the radio havess and tap it into your acc wire (the red wire). You can test this as well before you do it to make sure it works but take a shot piece of wire and tap it into your amp turn on wire and the other end into the acc wire (red wire). If it works (which it shold then just follow the direction I gave you. Please, please make sure you use electrcal tape on your connection. Do not leave bare wire exposed.

the dark blue (power ant wire) hook it into the 2 red wires right?