Buick Enclave build

ace_800
5,000+ posts

CarAudio.com Veteran
Box should be finished today. Amp going on top with a 1" space to keep it off the sub enclosure. Subs will be covered with mesh and thin metal grille cover to protect when I need to use the back. Will be wrapped in cream vinyl to match the headliner, I wanted it to stand out. Tuned to about 35htz, we did get good measurements and emailed Jacob for port length/etc.

I forgot to get pics of the rear doors and the HU, but I have to get into them again anyways to rewire crossovers and run remote wire RCA's.

2011-11-15095540.jpg


2011-11-15095606.jpg


2011-11-15095625.jpg


DSC_0388-1.jpg


DSC_0389-1.jpg


 
Thats the box, which is the false floor. The hole in the front is going to be filled to complete it with something, not sure. There is a bolt for the spare tire that is going to be left uncovered.

Yes Massive everything except the SA8's

 
From my experience, you'll want to make sure that amp gets ample cooling. I installed an NX5 in my buddy's GTO behind the trim on the rear passenger side. After about an hour of "loud" music, the amp shuts off. After letting it sit for about 15 minutes, it cools back down and plays again.

 
From my experience, you'll want to make sure that amp gets ample cooling. I installed an NX5 in my buddy's GTO behind the trim on the rear passenger side. After about an hour of "loud" music, the amp shuts off. After letting it sit for about 15 minutes, it cools back down and plays again.
I've hear some have had issues, its going to get plenty of cooling thou. The builder is a Massive dealer so he's taking that into consideration.

 
Ok so finish most of the rest today. I need to add fans for the amp as it gets hot. I have to say thou at the moment I'm NOT impressed. I have had a couple issues already so hopefully fixing them will help. The dustcap popped off and I need to reglue it down, the reconed sub I bought from someone here had the pos/neg switched so one sub was out of phase at first. I also need to finish up screwing the subs down and letting the silicone dry for the sub wiring.

DSC_0442.jpg


DSC_0434.jpg


DSC_0443.jpg


DSC_0444.jpg


DSC_0433.jpg


DSC_0445.jpg


2011-11-17121346.jpg


 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

ace_800

5,000+ posts
CarAudio.com Veteran
Thread starter
ace_800
Joined
Location
Okinawa, Japan
Start date
Participants
Who Replied
Replies
8
Views
2,125
Last reply date
Last reply from
ejschultz
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top