anger 10+ year member
Senior VIP Member
Sup community,
I'll try and keep this as short as possible...
I'm looking for somebody to work with me on an enclosure design. I was working with Buck until he informed me that they aren't doing just designs for the time being. I remember seeing other people referred to some other reputable builders/designers here.
I need a ported center console enclosure to house 2 12's in a '04 F150 Crew Cab. I attached some pics of a simple one I built to kinda test out the idea. Should be around 3.6ft^3 after displacement, tuned to about 33hz with 3.5" x 13" port area. It sounds pretty good, but I want to make some changes to the shape of the box (lengthen it for one, don't like the squared off back - see pic) and want to get someone involved that knows what they're doing...I don't have much experience and don't want to do any guessing this time around.
I'm willing to pay the right person.
A couple notes:
I've got RF P3's in there now but hoping to swap for a 'proper' pair of 12's eventually. Do enclosures need to be extremely specific to the drivers? Basically wondering if I can have an enclosure designed, run these P3's for a bit, then swap the pair later with no major issues.
Also, the internal volume of the one I built is to manufacture specs, but from what I understand, bigger is better, within reason...Is this correct?
Please let me know if you have the time & knowledge to take on this project, can send deposit to get started. Or if you're just reading and see an obvious flaw in my design, please, do tell.
Thanks!
View attachment 26547928View attachment 26547929View attachment 26547930View attachment 26547931View attachment 26547932
I'll try and keep this as short as possible...
I'm looking for somebody to work with me on an enclosure design. I was working with Buck until he informed me that they aren't doing just designs for the time being. I remember seeing other people referred to some other reputable builders/designers here.
I need a ported center console enclosure to house 2 12's in a '04 F150 Crew Cab. I attached some pics of a simple one I built to kinda test out the idea. Should be around 3.6ft^3 after displacement, tuned to about 33hz with 3.5" x 13" port area. It sounds pretty good, but I want to make some changes to the shape of the box (lengthen it for one, don't like the squared off back - see pic) and want to get someone involved that knows what they're doing...I don't have much experience and don't want to do any guessing this time around.
I'm willing to pay the right person.
A couple notes:
I've got RF P3's in there now but hoping to swap for a 'proper' pair of 12's eventually. Do enclosures need to be extremely specific to the drivers? Basically wondering if I can have an enclosure designed, run these P3's for a bit, then swap the pair later with no major issues.
Also, the internal volume of the one I built is to manufacture specs, but from what I understand, bigger is better, within reason...Is this correct?
Please let me know if you have the time & knowledge to take on this project, can send deposit to get started. Or if you're just reading and see an obvious flaw in my design, please, do tell.
Thanks!
View attachment 26547928View attachment 26547929View attachment 26547930View attachment 26547931View attachment 26547932