Box Build For my truck

Cali_Screw
10+ year member

CarAudio.com Elite
844
0
Rancho,CA
Thought i share my box i have been building for under my rear seat in my F150

here are some pictures of what i did today.

I have to work around a seat bracket for those of you curious to why i have that cut out in the box.

100_2148.jpg


100_2146.jpg


here is a side by side comparison to a box that ive been running that is up fire. New one is obviously down fire.

100_2150.jpg


2010-01-08165924.jpg


2010-01-08165937.jpg


2010-01-08165944.jpg


2010-01-08165953.jpg


2010-01-08170022.jpg


2010-01-08170032.jpg


Next is to test then if all sounds well, then carpet! //content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

 
I sure hope so, i am swapping to Fi SSD from two W6v2, i want more SPL now! i was able to get much more air space going down fire!

thanks for the complements guys! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
how do you get the subs to not hit the bottom of the floor? Add a spacer? but dont see anything like that

 
Nice... you have a seat lift in your truck?

Also would you mind sharing the dimensions? I plan on building a box for my brother's '06 F150 within the next month or so.

 
Nice... you have a seat lift in your truck?
Also would you mind sharing the dimensions? I plan on building a box for my brother's '06 F150 within the next month or so.
Yes, i do have a seat lift. running the LMI seat lift.

yea i could get you the dimensions if you would like. Does your brothers truck have a seat lift too or is he just running the stock height?

how do you get the subs to not hit the bottom of the floor? Add a spacer? but dont see anything like that
yes there will be a spacer/legs hold the box up. it has about 2.75" of clearance from the floor. may bot sound like much but there is another guy running the same subs in this setup!

What year f150 do u have? Ext cab or crew?
The truck is A 06 supercrew, i ill get some pictures of it sitting the truck.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
The tricky bit is that they're soft and floppy and they may be stretched a tad to go over the frames. I've used them in the past and come out...
6
2K
In order to answer your question, I would need to know what model (e.g. SW4200, SW7524DVC). Also, are you looking to make a ported box or sealed?
3
2K
Thanks everyone for the feedback. I got scared of the 4th being to much for a newbie but did end up building a box to 2.1 Cubic Foot tuned to...
7
2K
Love this sub, hate AB's site, short on info for sure. American Bass XR-10D2 box recomend: If you want to tune a 2.75 Cu Ft box (for two of these...
11
3K

About this thread

Cali_Screw

10+ year member
CarAudio.com Elite
Thread starter
Cali_Screw
Joined
Location
Rancho,CA
Start date
Participants
Who Replied
Replies
9
Views
1,324
Last reply date
Last reply from
Cali_Screw
Buick Amp Connector.JPG

maylar

    Jun 2, 2024
  • 0
  • 0
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0

New threads

Top