Best 10" Sub ???

[Phoenix Risen 10+ year member]

find a pair of 3hp motors and i can build you some sick subs that will handle 2500rms each no probs...

OP this!

the guy is a beast when it comes to building subs.

 

[Chipmunk2k3 10+ year member]

My boy has 2 12w6v2's firing down in the rear of his escalade. You can definitely fit two twelves back there. Another friend has 2- 12w7's w/ 2- 750/1's behind his third row of a denali 1 sub on each side with the port facing up. Forget the tens and get a pair of twelves back there.

Also a single xcon 12 w/1500rms in the right box will definitely do the task.

 

[hispls 5,000+ posts]

Any recommendations for a 15 then?

Audiopulse Axis (or LMS 5400). Either perform well in small-ish box tuned low. As someone else said the TC 3hp motor is a great platform to build from. pretty much anything built on that motor would be great.

SSA Xcon is another nice sounding sub that'll get loud.

 

[spljim 10+ year member]

why not a pare of seald xcon 12's 3cf and 3000 wats and your set

 

[murtnabila 10+ year member]

A pair of 12s will not fit. I'm gonna be pushing it for just a pair of 10s.

Here's a view of the space.

 

[murtnabila 10+ year member]

My boy has 2 12w6v2's firing down in the rear of his escalade. You can definitely fit two twelves back there. Another friend has 2- 12w7's w/ 2- 750/1's behind his third row of a denali 1 sub on each side with the port facing up. Forget the tens and get a pair of twelves back there.
Also a single xcon 12 w/1500rms in the right box will definitely do the task.

Can you show a picture of how they fit or something, please?

 

[LosIsATool 5,000+ posts]

Ya thats tight. I thought it would be bigger

 

[RAM_Designs 5,000+ posts]

You should be able to get a 15 in, they need around 3.5-4 cubes, my box is going to be 36x10x20.5 for a 15, it comes out to about 3.5 cubes

That box, assuming those are outer dimensions, is only 2.66ft^3 before displacements.

 

[murtnabila 10+ year member]

So far leaning towered the fi bl10.

If I do get these are these all the correct options I should have for say 2500-3000wrms for both subs?

Not pullin the trigger till sat so I'm still open to other ideas/options.

 

[Why So Cereal? 5,000+ posts]

I say go for the custom 10s splaudio offered.

they'll take way more power than a BL and sound better.

 

[murtnabila 10+ year member]

find a pair of 3hp motors and i can build you some sick subs that will handle 2500rms each no probs...

Strongly considering your offer. I would be able to throw both the bpx2200.1 amps I have just sitting around. I bought them a while back as they give out excellent power at 4 Ohms, dont see that often enough.

1) how much if you were to build a pair for me?

2) What would be the turn around time?

3) any warranty/support available?

4) Finally, how would I get the needed TS parameters needed for designing the box and would these subs be suited for a tuning around say 33Hz ported box?

 

[murtnabila 10+ year member]

Audiopulse Axis (or LMS 5400). SSA Xcon is another nice sounding sub that'll get loud.

Considering this one too it seems to be able to take more than enough power, but am not sure if it's even out/available yet or something. I went to XCON Series Sub Woofer and for the 10" specs it states coming soon, when is soon?

 

[Why So Cereal? 5,000+ posts]

Strongly considering your offer. I would be able to throw both the bpx2200.1 amps I have just sitting around. I bought them a while back as they give out excellent power at 4 Ohms, dont see that often enough. 1) how much if you were to build a pair for me?

2) What would be the turn around time?

3) any warranty/support available?

4) Finally, how would I get the needed TS parameters needed for designing the box and would these subs be suited for a tuning around say 33Hz ported box?

Private message him

 

[wenn_du_weinst 10+ year member]

post up your dimensions and I will see what works best for your cabin

I need:

height to seat level

max width for box

max depth for box at seat top and seat bottom

base of windshield to base of gate window

with out knowing exactly how your cabin reacts and exactly how much space you have all people can do (and have been) is guess.

Just using what I know from my suv with 3 rows 2 10's in a horn will work rather well

 

[mylows10 5,000+ posts]

Look at the dc line. Very loud subs with great sq and they are great for daily. If you decde to go that way let me know. O get them direct and can cut you a good deal.