Amp/ Sub Wiring

[dannyz122001 10+ year member]

ok... need a little help here. prob a simple answer but i dont wanna buy the wrong thing. looking to do 2 12'' solox off of 2 zx2500.1's. the mono's are rated at 2500watts at 2ohms. in order to wire the sub to 2ohms, i need dual 4ohm subs and wire them in parallel to get a 2ohm load correct? im still new to everything electrical so i need all the help i can get.

not sure if thats right or not... need advise

Click to read more...

 

[outspoken 10+ year member]

2 dual 2's

http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=2&woofer_imp=3

 

[dannyz122001 10+ year member]

i understand the RF picture, but i was planning 1 solox on 1 2500 and then the other solox on the other 2500. is that possible?/impractical?/just plain wrong?

 

[outspoken 10+ year member]

i understand the RF picture, but i was planning 1 solox on 1 2500 and then the other solox on the other 2500. is that possible?/impractical?/just plain wrong?

oooohhhhh.... reading>me, lol... no you should be fine running them like that if you have the charging to support it, so you were right, dual 4's...

 

[dannyz122001 10+ year member]

so dual 4's is correct? and im assuming that 2 kinetik 2400's and a 300A alty is enough charging power? and it is ok to do them at dual 4 in parallel on a 2500.1? thanks

 

[jrobb 10+ year member]

as far as solo x's i would recomend dual 4's in paralelland not dual 1's due to the D1's being more like D1.4's ...

2 HC24000's and 300A alt will be plenty to power 2 ZX 2500's...