Alpine Type R or Sundown SA 12

[YourNameHere 10+ year member]

my new amp is on its way alpine M500, and i only have room for 8g. power wire in my semi truck (not drilling any holes, company truck) so im gonna run that amp only, cant go bigger

 

[J31Rob 5,000+ posts]

DCON Series Sub Woofer

 

[YourNameHere 10+ year member]

i was actually looking at those last night...... 300 rms and im sure they are underated

 

[J31Rob 5,000+ posts]

For sure. It's a great little design with nice parts. It would love that enclosure too. "2.25 cu.ft. @ 28-33hz" is what it suggests.

 

[psych0ticnemes1 5,000+ posts]

i was actually looking at those last night...... 300 rms and im sure they are underated

I have a pair (actually 5) of BNIB Alpine Type E 12"s that'll wire to 2 ohms and are 250rms each. They only require 1.25 cubes per sub ported. You sure you can't fit a pair? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif $120 shipped for both!

 

[zako 10+ year member]

i only have about 500 rms to work with.... so im looking for a sub to reach its full potential off that

With 500watts RMS, I'd look into running the new Alpine Type-S (now rated for 500watts, with 15mm xmax), previous generation 2010 Alpine Type-R (1243d/1223d), or an Infinity Kappa 120.9w (rated for 350watts RMS, but seems to have problems with taking a bit over its rated power, 450watts in my case., 500-600wrms would be perfect for it IMO).

 

[jteske88 10+ year member]

guess what i gottttttttt? lmao

i wish i could find an old school RE SE.........

 

[naughtyca 10+ year member]

look at the PSI platform 1

Power Handling Ratings:

RMS Power - 750 watts

Peak Power Handling - 1500 watts

Standard features include:

Dual stacked 6.7" x 1" Y35 ceramic slugs

Chrome top and bottom plates

FEA optimized motor assembly

12 spoke aluminum cast frame - Black

Chrome push terminals

Standard length 4 layer aluminum roundwire voice coil

Dual 2 and Dual 4 ohm standard impedances

8" progressive roll poly-cotton spider

Sewn 3mm heavy duty leadwire

Kevlar impregnated pulp cone body

1.5" wide roll rubberized foam surround

6" polypropylene dome dustcap

12″ Platform 1 Subwoofer | PSI Car Audio

 

[bassaholic 10+ year member]

I have a Sa-12 running off a jl 500/1 and it sounds amazing and move tons of air for 1 12 and altho it murders the lows it still play punchy bass notes very well (over 50 hz) had to tame it by crossing @ 55 hz. The old RE SE i had before didnt move as much air and wasnt punchy at all anything over 50 hz wasnt that loud even crossed @ 80 hz...

 

[YourNameHere 10+ year member]

i ordered th D-CON......thanks people

 

[skylineTT 10+ year member]

Was going to suggest Obsidian but I heard they were out of stock?