8" sub box

[netzero 10+ year member]

Two 8" subs, 6 mm xmax off 200 rms, 3.25 cubes tuned to 35 with one 6" aero. Will it work, and sound ok for indoor use? If no, what should i change. Subs would be down firing with external side port. Thanks

Click to read more...

 

[WOT]

Box sounds BIG for little subs, little x mox and little power, Which drivers?

You probably dont need anything more than 2 cubes.

 

[netzero 10+ year member]

I'm thinking about getting a set of little ED test 8" off Skip01, and I have a 6" aero in house. Ed says recomended box size for spl is 1.5 tuned to 35... so if i got it to 3.25 at 34 i wouldnt need to cut the aero, it would be the full 17" long and i could use it later if i want. and the subs RMS are 100 a piece...

This is just an in home project, but according to the specs, do you think i would get results?

 

[Supergumby5000 5,000+ posts]

that box is far too big for a pair of 8's

 

[netzero 10+ year member]

or would i better off with something like 2.5 @ 38-39? would it still play the lows... im assuming not too well...

 

[netzero 10+ year member]

Heres a design i did with a loading wall inside, comes out to be 2.5 cubes, tuned to 34 with the subs down firing, 4 in off the floor. What do yall think?

Specs from ED

"Vented ( ideal ) 1.25ft³ Tuned to 30Hz

Vented ( DDLoud) 1.5ft³ Tuned to 35Hz

Power Handing : 100w

Qts: .48

Qes: .64

Qms: 7.50

Fs: 32

Re: 4.1

Vas: 40 L

Bl: 6.8 T*m

SPL: 84.95 dB

Sd: 220 cm^2

Xmax: 6.00 mm

Voice Coil : 25 mm "

 

[netzero 10+ year member]

bump?

 

[netzero 10+ year member]

Anyone think this would be ok for a little in home system?

Heres a design i did with a loading wall inside, comes out to be 2.5 cubes, tuned to 34 with the subs down firing, 4 in off the floor. What do yall think?
Specs from ED

"Vented ( ideal ) 1.25ft³ Tuned to 30Hz

Vented ( DDLoud) 1.5ft³ Tuned to 35Hz

Power Handing : 100w

Qts: .48

Qes: .64

Qms: 7.50

Fs: 32

Re: 4.1

Vas: 40 L

Bl: 6.8 T*m

SPL: 84.95 dB

Sd: 220 cm^2

Xmax: 6.00 mm

Voice Coil : 25 mm "

 

[Boomin_tahoe 5,000+ posts]

Tell me thats not the port extending out the box

 

[netzero 10+ year member]

Tell me thats not the port extending out the box

Yup.

 

[netzero 10+ year member]

Lol no input? I know it looks ridiculous, but will it sound alright?

 

[netzero 10+ year member]

Ok I did another one up, its more like 2 cubes tuned low, around 30ish i think. I'm not really sure though. Could someone check it for me? the total port length is 35" and the port is 3" wide. The rest of the dem's are in the pic. Which box do you think would be better? Thanks