Thanks, which tube driver blue would you get and how would you configure it. Any thoughts on subs (Focal 33wx or for half the $ 33V2 possibly?).
only by product of distortion that can blow a speaker is a clip to the degree it produces more power to destroy a speakers vc. rms power of the amp if too great can still cause a speaker to have a thermal melt down depending on the speaker. unless you are talking about clean power to the speakers rms power rting.Yes, I like the SymbiLink and all, but Zapco's are real hardcore bulletproof amps. They send a super clean signal, even in unbalanced, to your speakers, giving a cleaner ound and longer life to the speakers. Remeber, DISTORTION will blow a speaker, not RMS power!!!
Reference line from Zapco is the best value, quality/dollarwise. There are about 3 or 4 other comanies out there just as good, I just like Zaps outstanding tech support and those SymbiLink connections. Otherwise Arc, Truamps, etc. are up there.
//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gifRemeber, DISTORTION will blow a speaker, not RMS power!!!
Yes, I like the SymbiLink and all, but Zapco's are real hardcore bulletproof amps. They send a super clean signal, even in unbalanced, to your speakers, giving a cleaner ound and longer life to the speakers. Remeber, DISTORTION will blow a speaker, not RMS power!!!
*sigh*Remeber, DISTORTION will blow a speaker, not RMS power!!!
You guys do realize that Zapco isn't the only amp company that makes balanced inputs, right? Just off the top of my head I believe Xtant and McIntosh both have balanced inputs. Denon and McIntosh decks also have the balanced outputs.
Not to badmouth Zapco, I own one and I'm running a completely balanced setup from an 8250 to it.
To the original poster, my plan when I graduate college and have a million dollars (all going in my audi a4)
McIntosh 6 channel amp. The first 4 channels bridged to run my front stage. Last two channels bridged to run eith my Stereointegrity 12 or a new rs-audio 10 (just for consistency)
McIntosh 406 head unit/ MX 4000 DAC
Zapco EQs/X-Overs
RS-Audio Pro Speakers for front stage, no rear fill
Stereo Integrity 12" or RS-Audio 10" sub
Dedicated RS-Audio midbass mounted in the front of the car
Extremely sound deadened
That's my plan, good luck with yours ;0)