4 channel help

[Jeb 10+ year member]

I have a 4 channel audiobahn 4125hcq and i made the mistake of buying two 4 ohm DVC speakers when the amp is 1 ohm stable. I currently have them bridged into 2 of the channels wired at 1 ohm... is there any way that I could bridge the other 2 channels then connect positive and negatives togethor so that all 4 channels would be connected (both being bridged) to the speakers wired at 1 ohm? Or why would I not want to do this? Hopefully I made that clear as mud. Anyways any help would be appreciated.

Click to read more...

 

[johnecon2001 5,000+ posts]

Bridge the four channels down to two channels. wire one sub to each of the newely bridged channels. Wire each sub in parallell, for a final two ohm load on each channel. You'll get 500 watts a sub that way.

 

[Jeb 10+ year member]

yes i know that, just like currently i have both subs wired togethor down to 1 ohm and they are still getting 500 watts a piece my question is can i connect the pos. to the pos. in the unused two channels and also do the same with the negative.

 

[jsloan10 10+ year member]

If you mean connect the 2 + and 2 - of a pair of channels, no.