2 Type R 15 4ohm with kx1200.1

[Anlin154 10+ year member]

Do you guys think this amp will give enough power? Do I need an orion 2500D? Let me know these are the 05 model type R's 750RMS per speaker

Click to read more...

 

[SSS 18734 5,000+ posts]

I don't see why it wouldnt produce enough power... no you dont NEED an orion 2500D. The kicker should have them running at just under their rated RMS.

 

[DiamondFanatic 10+ year member]

You should be fine with that amp.

 

[Anlin154 10+ year member]

Thanks for the quik reply guys buying eqiupment friday

 

[JeffyZ33 10+ year member]

They should be right at their RMS, butttttttttttttttttt, type R are known for liking a lot more than RMS. I say 2500d //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ighettoboyi 10+ year member]

so 700+ a piece isn't enough?

 

[JeffyZ33 10+ year member]

of course it's enough...but could it take more....YES

precisely.

The 1200.1 will easily make them LOUD, but, if you want supreme loudness, 2500d //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 

[bigbangtheory 5,000+ posts]

I have a lanzar 1100rms vhc high current amp at 1ohm. Each sub is getting a little more than 500rms. My subs move a ton and is very loud and decently clean. I just dont know how some of these peeps are putting twice to three times the power to these things. I had to turn my gains down because I was afraid I was gonna blow mine.

 

[bigbangtheory 5,000+ posts]

its all in the box my friend.

Well most of it I know. But I am at 1.75cft and is very loud and it is sealed to boot. I know they shine ported, but hell I like it sealed so far.

 

[JeffyZ33 10+ year member]

Build a good box, give it clean power, know what you're doing, and voila. You can double the rms rating.