jagraj7870 10+ year member
Member
So i have been interested in car audio ever since i bought my Jeep (2007)
i had 2 12 inch p3s which were the loudest in my highschool, ever since this experience i just wanted to get louder and be the loudest in the area.
Next i upgraded to 1 18" d2 SMD/AA and powered it using a Rockford Fosgate T40001bd. I had the box built for me, and all i did was put everything together. I wanted to keep 5 seats and be able to see throughout my windows
i competed with this system 3 times and won once with a score of 144.6dbs on music (white girl) on a test tone it did 145.6 which i didn't really know too much of, if it was good or bad but i was told that it was a pretty impressive score.
Around January, while i was driving 40 kms to Centennial College (I was taking a auto body apprenticeship course) my whole right side channel speakers popped, my t500.2 amplifier got messed and sh*t was just horrible. I didn't know what the problem was because i checked all my connections that i had modified and everything was tight and clean. So then one day i went bowling with my cousins and my Jeep broke down on me, it wouldn't start so then i had it towed to my dads autobody shop.
i later found out that the positive lead that goes to my fuse box had corroded and was loose. I sanded it down and and cleaned the corrosion off it. It fixed all my problems!
I saw that the Kicker warhorse was for sale on audiosavings so i didn't hesitate... i bought it, not knowing that the SMDs have to be Dual 1s in order for me to run it -_-.
I decided to just sell my old SMD and start from scratch and go for KICKER everything, no disrespect Rockford Fosgate is a good company but i just prefer KICKER.
So for my next build i wanted it to be LOUD and LOW so i decided to go with the SMDs again since they are amazing subs, and tune the box to 30hz since, i wanted to be able to do hairtricks since that would be pretty impressive in the area that i live. (not that many ppl have wicked systems). Also a ground pounder no burp machine!
The gear that i needed to buy was:
2 SMD/AA's Dual 1s
1 Kicker Warhorse
3 Kicker IX amplifiers 500.4
4 sets of KS65.2 comps
5 XS Power batteries 4- D3100 and 1 D5100 (i already have one D5100)
3/4 MDF
4 6" Aero Ports
100 ft 2/0 gauge welding wire
2/0 ring terminals
black carpet
Kicker and Monster RCAs
and MOTIVATION
i had 2 12 inch p3s which were the loudest in my highschool, ever since this experience i just wanted to get louder and be the loudest in the area.
Next i upgraded to 1 18" d2 SMD/AA and powered it using a Rockford Fosgate T40001bd. I had the box built for me, and all i did was put everything together. I wanted to keep 5 seats and be able to see throughout my windows
i competed with this system 3 times and won once with a score of 144.6dbs on music (white girl) on a test tone it did 145.6 which i didn't really know too much of, if it was good or bad but i was told that it was a pretty impressive score.
Around January, while i was driving 40 kms to Centennial College (I was taking a auto body apprenticeship course) my whole right side channel speakers popped, my t500.2 amplifier got messed and sh*t was just horrible. I didn't know what the problem was because i checked all my connections that i had modified and everything was tight and clean. So then one day i went bowling with my cousins and my Jeep broke down on me, it wouldn't start so then i had it towed to my dads autobody shop.
i later found out that the positive lead that goes to my fuse box had corroded and was loose. I sanded it down and and cleaned the corrosion off it. It fixed all my problems!
I saw that the Kicker warhorse was for sale on audiosavings so i didn't hesitate... i bought it, not knowing that the SMDs have to be Dual 1s in order for me to run it -_-.
I decided to just sell my old SMD and start from scratch and go for KICKER everything, no disrespect Rockford Fosgate is a good company but i just prefer KICKER.
So for my next build i wanted it to be LOUD and LOW so i decided to go with the SMDs again since they are amazing subs, and tune the box to 30hz since, i wanted to be able to do hairtricks since that would be pretty impressive in the area that i live. (not that many ppl have wicked systems). Also a ground pounder no burp machine!
The gear that i needed to buy was:
2 SMD/AA's Dual 1s
1 Kicker Warhorse
3 Kicker IX amplifiers 500.4
4 sets of KS65.2 comps
5 XS Power batteries 4- D3100 and 1 D5100 (i already have one D5100)
3/4 MDF
4 6" Aero Ports
100 ft 2/0 gauge welding wire
2/0 ring terminals
black carpet
Kicker and Monster RCAs
and MOTIVATION
