1993 exploder build

atoz2

Senior VIP Member
So I decided to make a build log and log all the new things that happen to my vehicle and hopefully get plenty of advice and learn more and more about car audio.

To preface, I live in a small town in western Montana. I go to college full time and also work full time, So I can guarantee I will update this all the time. The purpose of this build log is more for myself to see where I've come from and motivate me to do what I can with my resources available.


Additionally, I'm one of those people who gets very devoted to a hobby then hits a wall and changes hobbies and tries to sell everything after spending boat loads of money, and I've just decided I really wanna keep up with car audio and hope eventually I might be able to compete and view that side of the community but currently with where I live that's not easy.

Anyway without further ado lets get on to my shitbox

062d1ba600eb90a003c0f06087a91b4d.jpg


333d8c8f75c5712a5ee4255cd7324195.jpg


Picked it up from some crazy blonde lady in moon boots carrying a chihuahua in her purse and let me tell you the car was absolutely disgusting... But it only has 127k miles and is easy to play around with, oh and cheap can't forget about cheap.

So I sold my blazer that go rear ended by a sheriff, and didn't really wanna take the HU out so I decided to search caco and got ahold of a pioneer DEH 9400bt its a nice head unit, have good pre outs doesn't distort at max volume, overal nice score for 60$ to my
Door. And 1st gen explorers don't need dash kits :3

So i a lot of gear sitting around from the rebuild that was going to happen to the blazer so I used the two DSS ethos 15s


5620e8d235db459f0cd9c481fc107582.jpg


Got a box from @mylows10 in a trade
It needed some work I sanded it up and doctored any cracks etc, but every time I went to paint it I got impatient so it looked like **** also was a little small.

4a0941deb61fe229a08702e64548c09f.jpg


Also before throwing the ethos in I put in some c2 threatcon 2s at 1 ohm because I though I might be able to get away with selling the ethos pair, but seeing as shipping was crazy that never happened but I grabbed the c2's from @CSCStang and for what they are they sounded amazing.

76879716a298b2b7ee947228457d3539.jpg


Oh yeah I also installed a new alternator! Got a js 270 amp alternator! Even though I didn't wanna buy one cause I felt all ****** about my blazer getting demolish but I was able to sell its alt so ha!
22b647aec7b18ab76da33f4893a5f130.jpg


Oh for amps in running a vfl 175.1 for the subs
5935acb829d3a12a665f539ad0baa6bb.jpg


And currently for my fronstage.... A Rockville 2 channel!
e0367c3d6e3879e57866416f051e6efb.jpg


And for fronts rage I'm just running a pair of alpine type s 5x7s

So goals currently is new box whole new frontstage and also to continue getting good deals on gear! Will update once I dig up more pics and vids!



Sent from my iPhone using Tapatalk
 
New box idea
0a3b1067dba4815896a0750ccda07ec0.png


620cdb6cc32bf152343f002a5a0bb2c4.png


Since I don't have a jasper jig it'll probably be like this, but if I can find a way to get a nice perfect circle I might invert them
753d6ca771f5298816731a1168c74e80.png
b664ec4bbc7e008f5999735f81168c5a.png


Probably pic up some supplies today!

 
Last edited by a moderator:
So.. New enclosure happened!!

2da14a87638d2b5ec77950cebbfc79f3.jpg


And the whole process went by nice and easy. I tried a wipe on black stain and it really didn't go so well. But I like it! Also!! I got the subwoofers inverted and was able to make a perfect cutout in the most time consuming of ways.

23bdb24da42d3f8c19167bd650311cbc.jpg


ff2b842fa66d250c05bdc25d065026e5.jpg


Basically I used a 2 1/8inch hole saw I found in my garage and since the cutout for ethos 15s is 14 1/8inch I just drilled a hole with the hole saw and used a half inch rabbit bit to slowly expand the cutout by a half inch at a time. Which worked great and was pretty easy!!

Videos of new box to come!

Sent from my iPhone using Tapatalk

 
Can't lose with ethos! [emoji106]I'm torn between building a new box for mine or not. Running 4 on an 8k in a no wall. Does a 151.1 but the box is flexing like a mutha. But only keeping them in for another few months before 8 of them go in a 4th

Sent from my iPhone using Tapatalk

 
Can't lose with ethos! [emoji106]I'm torn between building a new box for mine or not. Running 4 on an 8k in a no wall. Does a 151.1 but the box is flexing like a mutha. But only keeping them in for another few months before 8 of them go in a 4th

Sent from my iPhone using Tapatalk
Well my first box wasn't really ideal but this one suits my tastes so well!!

And that sounds pretty **** nasty!

Sent from my iPhone using Tapatalk

 
Well my first box wasn't really ideal but this one suits my tastes so well!!And that sounds pretty **** nasty!

Sent from my iPhone using Tapatalk
Oh it's loud for a daily right now. But a guy down in Beaufort running 2 8ks on 4 dss ethos 15s no wall Tahoe 155 sealed. I'm hoping for 163 with the 4th [emoji346][emoji346][emoji346][emoji346]

Sent from my iPhone using Tapatalk

 
So haven't don't a whole lot of playing around after the new box, got more to do but it's been raining! And I've been busy!

Was playing around seeing how well it moved some air, to most you guys this probably isn't impressive but I thought it was cool to say the least [emoji12]

https://vimeo.com/178249447

Sent from my iPhone using Tapatalk

 
Oh it's loud for a daily right now. But a guy down in Beaufort running 2 8ks on 4 dss ethos 15s no wall Tahoe 155 sealed. I'm hoping for 163 with the 4th [emoji346][emoji346][emoji346][emoji346]

Sent from my iPhone using Tapatalk
Man I love these drivers!! Ever since I got my first one!! Oh man I dot know if I'll ever get to 4 15s but maybe 3 one day!

Sent from my iPhone using Tapatalk

 
Man I love these drivers!! Ever since I got my first one!! Oh man I dot know if I'll ever get to 4 15s but maybe 3 one day!

Sent from my iPhone using Tapatalk
Yeah man can't beat them for the money especially. They take a beating and sound good doing it. One of the best subs for a 4th order too

Sent from my iPhone using Tapatalk

 
So haven't had time for a lot, mostly saving money and trying to figure out what to do next... I'm still debating more power or not. Still really need to fix my front stage since it's kinda ****. But I did notice my voltage was a tad better with the new box. So I figured i had higher box rise because of box flex, and sure enough I did so I did some bracing with wooden dowels. Besides that not s whole lot

lil fun with the lows :3

https://vimeo.com/179097229

I'm having some trouble determining my upgrade path from this point on. I only have the hatch deadened... But I'm pretty happy with it right now, still kinda want more but I don't know if moving up to 5k is going to give me a very noticeable difference. If I didn't live in Montana i would probably try to sell the woofers locally and try 4 12s, but since selling anything heavy is going to be a pain I'm not sure what to do..

Sent from my iPhone using Tapatalk

 
Last edited by a moderator:
Another update have some big stuff about ready to show up tomorrow! But looking to add more batterie(s). Currently looking at exide g31's or juice box black cherry.

Sent from my iPhone using Tapatalk

 
Just gonna put this here
8fde0c332c91ede9f4fee6cb79bd5b69.jpg


Pretty excited! 2nd vfl 175.1. Got it used for a steal, although usps had bent some mounting feet during shipping, I just used a vise to straighten them out! Tested at 100% functional!! Now the question is strapped or gain matched??

Boom! Any recommendations for doors?? I have 5.5"x7.5" openings! About 3" of clearance from window. I was looking at Mclaren 5.25s or maybe pvr 5", was also looking at more sq related door speakers and tweets but I'm worried they won't be able to keep up with the substage.

Sent from my iPhone using Tapatalk

 
So! Some sky high 80m deadener on the way! More lugs. Gonna need more wire for a 2nd run eventually strapping rcas and some speaker wire!!

In the mean time I found a good deal on some batteries about 3.5hrs away. Guy was nice enough to meet me in the middle

9a747662db787691d875f1a39f70bbc7.jpg


Ones resting at 12.6 the other 12.8

Got a great deal on these. Both batteries for 100$ I'm pretty stoked to get the second amplifier in and get that roof deadened. Need to order some more stuff but waiting until I get some work done and do some planning.

Sent from my iPhone using Tapatalk

 
If your voltage is better with a new box, then your not pulling as much power..which is bad.
My voltage "was" better. Haha

Then I braced the box

And it went back to being in the 12s. I'm assuming the rise was from box flex, also got louder from bracing

Sent from my iPhone using Tapatalk

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I would prob go and take it to a shop to someone that knows how to install, pay the $50-75-100 bucks so its done correctly.If you continue to do...
1
1K
Contact ANS he has a used Focal 8 Channel DSP that went for 1,300 bucks and is selling used I think shipped for 450. And from what I have seen and...
13
2K
Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
909
https://www.youtube.com/@therealmatty_s/videos
0
506
I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K

About this thread

atoz2

Senior VIP Member
Thread starter
atoz2
Joined
Location
Hamilton, MT
Start date
Participants
Who Replied
Replies
52
Views
4,711
Last reply date
Last reply from
atoz2
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top