This may be a dumb question so bear with me. I have one P2 10 inch rockford fosgate punch (300w-500w) which can be ran parallel at 1 ohm or in series at 4 ohm. I was running it in series with my Alpine MRV M500 which I think has blown it's circuit. I am in the market for a new amp, and am wondering If I should get a different amp or the same one. I realize that I can get better bass while it is wired at 1 ohm. I am looking at this amp from CT sounds. As you can see it is monoblock and there is two different connections for both positive and negative speaker wires. I only have one pair of positive and negative speaker wire ends, so would I just leave two of the connections on the amp empty?