man_n_da_trunk 10+ year member
Member
Wussup Car Audio experts, and fans. This will be my first professional build so any help that you can give me would be great. First off Ive been planning this build for a year now. Just got back from afghanistan and im going to be installing this system over the next couple of months ill keep everyone interested posted with pics. Ive always been a fan of this page and the amazing things that ive seen people do on here so i figured its my turn to start my own log so with no further do here is my setup. here is the box i had made to the type x specs
View attachment 26521677 here is the speakers all mouted in placeView attachment 26521678and a pic of my merc im installing in View attachment 26521679
ok on to what will be powering these beasts of subs lol. the amps i chose to go with came with a whole **** load of controversy. I decided to run with two of the hifonics brutis 2610's. thats ruffly 2300 rms from each amp. the subs are wired parallel to achieve a 1 ohm stable load. so hopefully these amps will do the job. also ran with a 4 channel hifonics zeus for my component speakers. so here are some pics of the amps
View attachment 26521680View attachment 26521681View attachment 26521680View attachment 26521681View attachment 26521677View attachment 26521678View attachment 26521679View attachment 26521680View attachment 26521681
as you can see i have a lot of work ahead of me. i still have to install the big three upgrade along with like a 200 amp alternator as well. will try and upload more pics tomorrow. as i will be starting to put the dynomat into my trunk. in the mean time feel free to leave comments and susgestions on my install thanks
View attachment 26521677 here is the speakers all mouted in placeView attachment 26521678and a pic of my merc im installing in View attachment 26521679
ok on to what will be powering these beasts of subs lol. the amps i chose to go with came with a whole **** load of controversy. I decided to run with two of the hifonics brutis 2610's. thats ruffly 2300 rms from each amp. the subs are wired parallel to achieve a 1 ohm stable load. so hopefully these amps will do the job. also ran with a 4 channel hifonics zeus for my component speakers. so here are some pics of the amps
View attachment 26521680View attachment 26521681View attachment 26521680View attachment 26521681View attachment 26521677View attachment 26521678View attachment 26521679View attachment 26521680View attachment 26521681
as you can see i have a lot of work ahead of me. i still have to install the big three upgrade along with like a 200 amp alternator as well. will try and upload more pics tomorrow. as i will be starting to put the dynomat into my trunk. in the mean time feel free to leave comments and susgestions on my install thanks
Last edited by a moderator: