03 Mustang Install Log

HeatSeeker
10+ year member

Oh lawds
So ladies the time has finally come for me to begin my installation, after a delay of about 2 years.

the car:



And a list of what's going in it:

Illusion Audio CH-1 Horns powered by Orion 2002

XXX 7" mids, sealed pods, powered by Orion 4002

12" Mag (new one) with Orion 1200D. Probably ported around 30hz

Secondskin damplifier and firewall (i live in FL so hopefully this'll kill 2 birds with one stone)

Knu Kolossus power all around.

Tara labs RCA's and speaker wiring all around.

Gonna start off by putting some damplifier in the doors, hopefully tonight if I get a chance. The only thing I dont have is all the sound deadening (the rest is on its way), or the rca's/speaker wire. Pics will be posted as updates are made //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Looks like its gonna be a good system, but whats the purpose of deadening the firewall? Dont live in FL so i have no idea.
Its the name of the product Im using lol, helps lower the internal heat of the car, should come in handy once summer rolls around.

 
Nice selection on amps, i have run Orions for the past four years up until now but I miss mine, cant wait to see the install
Thanks, yea I just like the plain chrome look, I was going to originally go with kicker but these were cheaper //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
subscribed, but how can you set a timeframe for your substage when its not even released yet?
What? I think we are thinking about different things, unless I have a sub from the future in which case....anyone got 10,000$ for a sub from the future? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
So I got some deadener on the door tonight, figured I'll wait till I install the speakers to do the rest. Bad thing though I may have covered a hole I need with the damplifier, cause the ****ing door panel wont go back on right now //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif. Was gonna do the other door a little bit but I dont wanna get too pissed and break something...you think theyd make it a little easier to do something as simple as taking off a ****ing door panel.

 
What HU you running? And more pics of the car! Lower it, grille delete/chin spoiler and take those mudflaps off!
More pics will be on the way lol. It is lowered already actually. So much so that the exhaust scrapes if I go over a speed bump too tall //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Im taking those horrible mudflaps off, I meant to do it when I first got the car but you just reminded me lol. hell why dont I go do that right now? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

And Im running an Eclipse 8455 headunit.

you said a 12" mag. the new one. i am thinking of the one made by stereo integrity if so, they arent out yet.
Ah ok I just checked their website and there is a newer one lol. I meant the 05-07 model with the regular 12-spoke basket.

 
Well not much going on, gonna start the trunk tomorrow, just a quick pic I took in the beginning of the door deadening application:



Also picked up this new grille, some people probably wont like it but I think it looks soo much better than the stock POS, and it was a hell of a lot cheaper than the grille delete kit.



 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

HeatSeeker

10+ year member
Oh lawds
Thread starter
HeatSeeker
Joined
Location
Tampa, FL
Start date
Participants
Who Replied
Replies
16
Views
1,322
Last reply date
Last reply from
HeatSeeker
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top