troubleshooting

Hello everyone, I've been enjoying the performance of my two Sony 12” subs for a significant period. However, recently, during a music session with a friend, the volume was pushed to its limits, resulting in a loud buzz followed by silence. Upon restarting the car, one of the tweeters appeared...

First post, so take it easy on me. For context, I had my previous set up (simple amp/subs/aftermarket HU setup) working just fine. I just finished rewiring it all with a better quality wiring kit, and added a capacitor as well. Im running 600 watt amp to two 10” subs, ive got battery positive...

Old old system amp, capacitor, and 2 12"s. Running an LOC off stock headunit in my 13 accord lx. subs work fine, except when it rains, and when i shut the car off the subs play a low note consistently until i remove the remote wire. I dont understand... literally only happens in the rain. Its...

Hi, I have an F10 BMW with the HK sound system. The speakers and subwoofers have been upgraded to the bavsound ones. The bass no longer works at all. It hasn’t worked for the past month. I had one of the subs replaced and the bass still doesn’t work. Any idea on what it could be? I was thinking...

I'm plugging my iphone into the aux port using a 3.5mm to lightning cable. Recently when I try to play music this way the songs vocals are very quiet, but the instruments sound fine. I've swapped cords, but that didn't help. One thing I noticed is that if I leave the cord plugged in to the...

looking for good help, please advise if you can. I wired my amp to my head unit using speaker level ins. It’s a 5 channel amp. I bridged it to power my front speakers. The right speaker and tweeter keep cutting in and out. To see if it was the amp I switched the outputs around and now my left...

I am confused on how you tune an amp and line out converter at the same time. I have an LP7-2 LOC, and R1100M Amp and they both have gain knobs on it. I understand that for each, if tuning by ear, you need to put your radio at 3/4ths volume, play a 40hz test tone, and then turn the gain knobs up...

I installed two 12 inch subs with an amp and a line output converter in my Honda Accord 2009, and I wired it to the harness on the head unit but the amp never turned on. I took it to a car audio store and had them look at it, and they said that it can't be wired to the radio because it isn't...

Sorry in Advance. I am working my build on a Cadillac CTS (Base) Running a JVC 7' Double Din two Pioneer 3003s DVC 4 ohms in a sealed box. Previous Amp is a JBLClub 5501 1500 This Amp at least pushed my Subs but obviously not enough Juice for the two, so I upgraded. This Amp works and connects...

So today I rewired my Massive Audio HippoXL 12 to my MB Quart 3k (1.5k rms). The speaker is prewired with 8ga direct from the leads, dual voice coil, so 4 wires, 2 pos and 2 neg. I ran the 8-4ga with a metal wire coupler. Before this rewire I had the speaker sitting in the box the normal way...

I bought a belva 212 kit from sonicelectronix about 1.5 years ago and my friend wanted to make some adjustments to my set up. He was playing some music through and adjusted the LPF on the amp when out all of a sudden my subs just quit working. can anybody help me figure out what my problem is? I...

Hey guys, im a new member on here and im calling out for help if im posting on the wrong thread can u direct this to the right thread. I have a 2011 lancer with a factory rockford system (4 component speakers,2 tweeters, 10" woofer in a concealed box and 5 channel amp-for those not familiar with...

Hey guys, I have an amp with a blown output transistor (ADS p640). I'm only using 2 channels and it has 6 channels. Is it possible for me to just remove the shorted transistor so it doesn't blow the fuse, and use channel 3 instead of 2? This is mostly just to test the other parts like the PSU...

I sold my friend my WORKING (perfectly I might add) JVC KW-NT30HD. He used it for about a week then it blew a fuse. He brilliantly just added fuse after fuse after fuse even though he didn't make any changes is, lol. As you might suspect it popped every fuse. All he did was inspect the wiring (I...

Ok the issue im having is with power. This is what I have done already, checked all wiring, fuses, ground to chassis and voltage through amplifier. Problem: my amp shows it has voltage going all the way through b+ and coming out to the ground connection at the cars body. Yet the amp still wont...

I have my radio hooked up to a four channel amp that runs my front speakers and my sub. A few months ago the front speakers and sub starting cutting out for some reason. I've checked all the connections and the radio is practically brand new. I know it's not the speakers that's the problem...

So I have an older Aluminum coned Rockford Fosgate T1 that I bought off of this website from a highly rated seller. I'm going to wire it in and running + to + and - to - for a final ohm load of 2 (it's a dual 4) issue is, it only works when I wire one coil and one either positive or negative...

wheather im driving, in idle, or on accessory mode my amp just randomly stops producing output to my subs. the light doesn't even twitch when this happens, and everytime it does this I have to take me faceplate of my reciever to turn the amp off, and then ill put it back on, and it turns on, my...

I have a DUAL XHD7714 (I know that's part of the problem) that has a dimming issue on the screen and loss in speaker sound. It worked fine at high volume levels (46) before I installed a KENWOOD KAC 9102D with Sony Xplod Subs 1200w 12's. Now sometimes it works okay then at times the screen on...

I have a JVC S590 CD player in my car and it has worked fine until I drove over a speed bump last week. The control panel turned off like it lost power and when I jiggle it, it sometimes catches the power back (the control panel lights up again), which makes me think it might be a loose...

I have 2 10" boss audio phantom series subs with dual voice coils. I have 3 different amps, all being 2 channel. I can hook each one up without any issues and i get a green power light, which is good. Whenever i hook up the subs the amp will go into protection mode. I have checked all amplifier...