Jason Schoeberlein
CarAudio.com Newbie
Last edited:
Just purchased a RD1500 and looking for ideas should I go with just 1/0 or 1/0 to 4ga
- Thread starter Jason Schoeberlein
- Live activity
- Replies 13
- Views 973
Old_Slapper
CarAudio.com VIP
You can use welding cable. Just make sure it is OFC and not CCA.
Or, you can get 2 gauge wire ferrules, with the proper crimper, and strip a 0 gauge to fit the 2 gauge.
Or, you can get 2 gauge wire ferrules, with the proper crimper, and strip a 0 gauge to fit the 2 gauge.
HKS 80PCS Wire Ferrules Connectors - AWG2-35.0mm² Copper Barrel Pin Cord Ends Insulated Ferrule Terminals for Wiring Electrical Crimp E35-16 Black: Amazon.com: Industrial & Scientific
HKS 80PCS Wire Ferrules Connectors - AWG2-35.0mm² Copper Barrel Pin Cord Ends Insulated Ferrule Terminals for Wiring Electrical Crimp E35-16 Black: Amazon.com: Industrial & Scientific
OP
Jason Schoeberlein
CarAudio.com Newbie
- Thread Starter
- #3
That's a great idea for the 2 ga, I have 2 ga ferrules and debated just cutting off strands and doing that and I do have a crimper but it only goes to 8 ga.
I am going to eventually add on to my other eight speakers in the front with a Helix V Eight so maybe a distribution block would be a better idea just go 1/0 to1 ft of 4 ga to the rd1500? others I have talked to said that would be fine but I like to get a consensus. I have JL W6s that I used to have with a RF 1.1200 but it just wasn't enough for them...
Last edited:
dragon.breath
10+ year member
Senior VIP Member
A short run of 4 gauge would be fine. Or you can get offset 0 gauge to 4 gauge adapters that should work.
OP
Jason Schoeberlein
CarAudio.com Newbie
- Thread Starter
- #6
Do you remember the brand? Its hard to find good 2 ga
1g EB Flex ™ Welding Cable - BLACK - Electron Beam
1 gauge class K welding wire. Single conductor. NEMA class K. Temperature range of +105 C to -40 C. 836 strands of 30g bare bright annealed copper with premium Poly-XL™ high energy electron beam cross-linked polyethylene jacket. Specifically engineered for the welding industry. FREE US...
electronbeam.com
OP
Jason Schoeberlein
CarAudio.com Newbie
- Thread Starter
- #8
Wow only 3.21 per ft! Do u know the thickness in by any chance? Skyhigh 1/0 has it at .528 in but it's 116.00 for 20ft1g EB Flex ™ Welding Cable - BLACK - Electron Beam
1 gauge class K welding wire. Single conductor. NEMA class K. Temperature range of +105 C to -40 C. 836 strands of 30g bare bright annealed copper with premium Poly-XL™ high energy electron beam cross-linked polyethylene jacket. Specifically engineered for the welding industry. FREE US...
Last edited:
I don't know off hand. I ran 1/0 eb flex in my Saturn it was slightly small than the 1/0 input on my smart 3
But that 1g should be small enough to fit your inputs if not the 2g will.
Personally I wouldn't pay the premium price on car audio wire. Copper is copper imo
But that 1g should be small enough to fit your inputs if not the 2g will.
Personally I wouldn't pay the premium price on car audio wire. Copper is copper imo
Last edited:
huberoy123
10+ year member
Member
The cable has batterycableusa.com and trystar.com printed on it. It has a drop down menu that allows you to order various lengths.
Here is the link on eBay. https://www.ebay.com/itm/1320767374...d=link&campid=5335951755&toolid=20001&mkevt=1
Old_Slapper
CarAudio.com VIP
OP
Jason Schoeberlein
CarAudio.com Newbie
- Thread Starter
- #12
thanks bro I appreciate it!
Last edited:
OP
Jason Schoeberlein
CarAudio.com Newbie
- Thread Starter
- #13
Was going to run ground back to the main battery so 20 ft. I have a BMW so probably only like 10ft each way.
Old_Slapper
CarAudio.com VIP
Then this would be better.
Activity
No one is currently typing a reply...
Similar threads
- Started by JLeal
- Amplifiers
- Started by MWauge
- General Car Audio
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 13
- Views
- 973
- Last reply date
- Last reply from
- Old_Slapper
