OP
Take your time man.. It will come together. Its been raining here all dammned day. I had Plans for some temp gear on door speakers to swapp out. I need to change one more temp amp out to one that I care little for ATM. Had someone try a Slimm Jimm on my truck last week. Swapped some speakers out , amps and subs and Cheaper HU for now. Just got one more amp pull/swapp outHave to wait till i have a day off work, its getting dark to early now for me to figure out whats wrong, i dont need more problems was hoping to put panels on and start 1/0 wiring, ohhh well.
Thanks man. Ya. I had it parked in the Street for a bit. Got it in the Driveway now on my Cameras. Had a Flatbed in the drive for a bit and my 2500HD and HHR in front of Trailer. other truck parked on street just see one side with cameras at Mailbox. Pretty good Neighborhood to be honest. Never any real issues. Maybe a MCDs cup in the yard once in a great while on my corner lot/yardGood luck with the swap. Aint cool someone trying to slim jimm you dam thieves.
Hows that Transmission holding up?? ECM in the floor pan or under the hood??I've had water in my doors once or twice. I recommend plugging every "drain" hole you can to avoid getting water in them.View attachment 44048
Id take a Yard stick or flat piece wood across that door panel and measure both side of depth to see what you have, then measure on the door to see what you can do or have to cut/or removeBetter view i flipped the photo.
Yeah even the good hoods get some bad people rolling thru, worlds gone mad.
Right.. Things are getting more complicated these days. Making it to where that average Joe (such as Myself) have no way of repairing of fixing anything at home.. Rather to spend X amount of $s to even do simple preventive maintenance on your own vehicle?? Try finding the Dipstick for your transmission in most cars today to check Fluid level and or to see if your fluid needs attention??Yeah i need to see how far that door panel speaker grill is from the speaker in the door, and you see its not a even space probally a good 1/4 inch or more on that angle, more like 3/8 of a inch, why cant things be simple.
I put those in my F250 and they seem to be fine.I like using foam baffles. I have had the current baffles ~4 years. As far as frequency attenuation, I hear no discernible difference sans baffles.
View attachment 44001
There is not a maximum distance between a battery and a fuse. However, the fuse only protects everything downstream of it, so the closer the better. A short after the fuse blows the fuse, whereas a short before the fuse causes a fire.Got a question for anybody can answer when I'm hooking up my power to my battery how far away is the max the fuse can be away from the battery?