Would this design work alright?

[95BlackGA 5,000+ posts]

I have a box design that I am wanting to know if it would sound decent, and get low (with proper tuning of course). This is not to spec, and I have just done a quick mark up of it. Anyway, do you think it would work, fairly well?

Click to read more...

 

[95BlackGA 5,000+ posts]

I just noticed I forgot 2 of the 45's... Those WILL go on the box too.

 

[oglejust 10+ year member]

i would do this instead

 

[95BlackGA 5,000+ posts]

May you tell me why?

 

[James Bang 5,000+ posts]

those 45s he scratched out looks like it may interfere with airflow, and he added two to help w/ airflow

 

[Duke 10+ year member]

The middle part of the port where both individual ports meet doesn't look like it widens to allow proper change from 2 ports to 1 single port.

What is your target port area per sub?

 

[James Bang 5,000+ posts]

The middle part of the port where both individual ports meet doesn't look like it widens to allow proper change from 2 ports to 1 single port.
What is your target port area per sub?

x2

 

[Immacomputer 10+ year member]

The center part of the port needs to be twice as large as one of the side ports.

 

[95BlackGA 5,000+ posts]

Reading > All of you. I'm not sure how much port area, as I have no idea what subs I will be getting. I know I missed 2 of the 45's, that the guy added. This design IS NOT to specs by any means at all. All I am wanting to know, WILL THE DESIGN WORK FAIRLY WELL? I know I need to take out the 4 inner 45's (the ones that will mess with air flow. But, other than that, would it work decently good?

 

[Ninteens 10+ year member]

Yes, that should work fine.

As long as its designed correctly in the future.

 

[James Bang 5,000+ posts]

wtf...

in that case.. no that shit won't work alright.

reasons are already stated.

 

[95BlackGA 5,000+ posts]

wtf...
in that case.. no that shit won't work alright.

reasons are already stated.

Why exactly wouldn't it work?

 

[Immacomputer 10+ year member]

Yes it will work as long as you do what I said above.

 

[95BlackGA 5,000+ posts]

That's what I thought, and I knew I would have to, but seeing I just got the hang of AutoCAD, I did it the easiest way I could. So, if I double up on front port size, and take out the 4 45's in the front chambers, it should be ok?

 

[oglejust 10+ year member]

those 45s he scratched out looks like it may interfere with airflow, and he added two to help w/ airflow

thanx... i kinda forgot to check this 1 lol