Hello everybody I have been wanting to build an enclosure for my truck for a while now so finally I have time. I do not have a lot of experience but I have learned a lot for this forum. I have very few space to spare. I will be installing 2 Clif design 10in CD100w. I can only spare ext. measurements of 28wX15hX16d. I prefer ported if possible. I have come out with the following port measurements of 2 3inch round ports being 5.82 in port length tuned to 38 hz. It will only be a one chamber enclosure. Do these measurements sound correct. the speker parameters are:
Fo(HZ) 47, QMS 6.9, QES 1.3, QTS 1.09, VAS(liters) 28.2, REVC(ohms) 3.4, SPL 87, X-Max 14
Subs will be powered by an 800 watt amplifier.
Thanks in advance
Rick
Fo(HZ) 47, QMS 6.9, QES 1.3, QTS 1.09, VAS(liters) 28.2, REVC(ohms) 3.4, SPL 87, X-Max 14
Subs will be powered by an 800 watt amplifier.
Thanks in advance
Rick