Would I be able to use these on my box?

[xmakeafistx 10+ year member]

I ripped these off my Boston 12.5LF Pro Series woofer, since it was already blown..

I want to use these as terminals for my box, but they aren't long enough to go past the 3/4 inch of mdf.

Any suggestions? I just stopped by the car audio shop around here and they were closed during their open hours? so i'm trying to wing it on my own.

Thank you all.

Click to read more...

 

[audioholic 5,000+ posts]

Well, you could drill a countersink into the hole to allow for the length of those terminals. Or you could just go to partsexpress.com and buy new ones for like 10 bucks. Or just drill holes for the wire to pass through, and skip using terminals altogether. Plenty of options, you just have to decide which one is right for you.

 

[Slo_Ride 5,000+ posts]

I want to use these as terminals for my box, but they aren't long enough to go past the 3/4 inch of mdf.

Thank you all.

nevermind i misread

 

[Slo_Ride 5,000+ posts]

Countersink, or use bolts or all thread with some washers and nuts. Or just drill some holes to run wires thru and seal it up, its what I do.