wiring help**

[cfizzle]

http://www.rockfordfosgate.com/rftech/wiringwizard.asp?WoofQty=2+woofers&WoofImp=Dual+Voice+Coil+-+2+ohms+x+2&image.x=25&image.y=0

i am doing wiring option 2 and i am just confused on how to do this? i have two stereo integrity D2's ( the older ones) and a ma audio amp hk898...can some one please help me on this...

Click to read more...

 

[flakko 5,000+ posts]

like

lets say your looking at the subs like so:

1.take one of the positive terminals on the 1st sub, then connect it to a positive terminal on the 2nd sub

2. Do the same with the negative (be sure its not on the same voice coil)

3. take the left over terminals (should be + and - on different sides of the sub) on each sub and wire them accordingly

i hope that made sense

 

[cfizzle]

step 3- it what gets me it show that i connect a wire from the + to the - on the same sub...or do i connect 1 + from one sub and connect it to the other + on the other sub and same for the other sub?? is that how

 

[flakko 5,000+ posts]

oh the remaining + and - on the same sub for each sub

 

[cfizzle]

k thats what i did, but before it blew it wasnt as loud as it is now...should i change the gain setting?

EDIT:but wait you know how on the d2's how there is 2 terminals on each side of the sub... so say i just connect a wire from the + and then connect it to the - on that same side or do i connect it from one terminal to the otherside terminal?

 

[flakko 5,000+ posts]

k thats what i did, but before it blew it wasnt as loud as it is now...should i change the gain setting?
EDIT:but wait you know how on the d2's how there is 2 terminals on each side of the sub... so say i just connect a wire from the + and then connect it to the - on that same side or do i connect it from one terminal to the otherside terminal?

did you use a dmm to set the gains?

huh?

 

[cfizzle]

ya it was the way my gains were set....thanks for the help tho

peace