cory551 10+ year member
Member
Okay, so I have...
2 pioneer premier dvc 2ohm subs.
and I was running a mono amp on it before, and it would run the amp back to .5 ohms or 1ohm no matter how it was wired, so i went and got a 2 channel amp.
I got a power acoustik 2600 lfa series amp. running at 2ohms, i believe it will put out like 600watts to each sub, and the rms is 800, so should be okay.
anyway, I looked at the wiring diagrams on crutchfeild, and i'm starting to worry.
it shows:
http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_2-ohm_2ch.jpg
since it's a 2ohm sub, does that mean that the amp has to run at a 4ohm load?
2 pioneer premier dvc 2ohm subs.
and I was running a mono amp on it before, and it would run the amp back to .5 ohms or 1ohm no matter how it was wired, so i went and got a 2 channel amp.
I got a power acoustik 2600 lfa series amp. running at 2ohms, i believe it will put out like 600watts to each sub, and the rms is 800, so should be okay.
anyway, I looked at the wiring diagrams on crutchfeild, and i'm starting to worry.
it shows:
http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_2-ohm_2ch.jpg
since it's a 2ohm sub, does that mean that the amp has to run at a 4ohm load?