whats it all mean

[fakename 10+ year member]

http://img96.imageshack.us/img96/8170/dscf31786zg.jpg

where should i have these little boogers turned? i just got upgrading my power/ground to 1/0 knu kolossus and new rca's. somehow, i completely lost my lows. and also, before i would have it on volume 35 and it'd be slammin, but now i have to have it on about volume 50..and still no lows.

edit..by the way, i will be upgrading my spkr wire to 10 gauge on monday

Click to read more...

 

[rocky 59 5,000+ posts]

put your rcas in the input slot //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[project f-150 10+ year member]

rca's should be on line in not out

 

[project f-150 10+ year member]

d*mn beat me to it

 

[fakename 10+ year member]

aww shit. how gay can i be. brb.

 

[wilzyx 5,000+ posts]

are your headunits preouts stronger than 2 volts, if so change your input sensitivity thing to 2v-8v

 

[fakename 10+ year member]

are your headunits preouts stronger than 2 volts, if so change your input sensitivity thing to 2v-8v

did that, and it almost went completely quiet //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

edit..the rca thing didnt work

 

[rocky 59 5,000+ posts]

change your lpf up to 63 or close to there.

 

[project f-150 10+ year member]

what kind of hu is connected to it? sure your sending signal? where is the subsonic set?

 

[wilzyx 5,000+ posts]

try re-adjusting the gains

 

[fakename 10+ year member]

the only thing i lost are the lows. the mids are fine. i have no idea how to adjust this and that. i dont even know what sub-sonic means. i played with the bast boost but the lows just dont hit. could a bad ground be a problem? (amp ground)

 

[rocky 59 5,000+ posts]

the only thing i lost are the lows. the mids are fine. i have no idea how to adjust this and that. i dont even know what sub-sonic means. i played with the bast boost but the lows just dont hit. could a bad ground be a problem? (amp ground)

gtfo of car audio now

 

[wilzyx 5,000+ posts]

if you have a ported box put the subsonic filter at 20-25 hz so you dont kill your sub. and did you wire your sub out of phase? flip the phase switch around and see if that helps.

 

[fakename 10+ year member]

gtfo of car audio now

maybe later.

 

[project f-150 10+ year member]

sub sonic is just like your lpf...just does it at the other end. so basically it sets a cut off for how low in freq. the subs will play. if it is set high and the lpf is set low it gives you a very smap window of playable music... does that make sense at all?