What will sound best with my equipment.....Skar/NVX/Pioneer/JBl?

[will3 10+ year member]

If you want to seal up the port you could use the GTO 1014's they will work well in .7 sealed with the GTO751ez , but they are not slim subwoofers you would have to make sure they fit as far as mounting depth

 

[MrAcd 10+ year member]

If you want to seal up the port you could use the GTO 1014's they will work well in .7 sealed with the GTO751ez , but they are not slim subwoofers you would have to make sure they fit as far as mounting depth

What about the dcons? Would they sound better? they will work in .75, also they are shallows so they have a lot of breathing room

 

[will3 10+ year member]

I have no personal experience with the Dcon only reputation and I have heard several Dcon setups ported ,(Which sounded great btw) but I have yet to build or hear a sealed or 4th order Dcon setup to give you an honest comparison sorry

 

[MrAcd 10+ year member]

I have no personal experience with the Dcon only reputation and I have heard several Dcon setups ported ,(Which sounded great btw) but I have yet to build or hear a sealed or 4th order Dcon setup to give you an honest comparison sorry

I see you have incriminators, Im thinking about those, how do they preform?

 

[will3 10+ year member]

I wouldn't recommend the I series, they do not work very well sealed and the absolute minimum I would recommend ported is 1ft3 net per, you could run the Lethal Injection 10's they will work very well in .7 sealed, but you would be severely under powering them with the 751ez

 

[CodyWayne718 10+ year member]

I'll Prolly get flamed for this but I really don't care... I don't know what their 10s recommended sealed or ported space is or their rms ratings but the best sealed sub I have had are the new re audio.... flame away lol

 

[MrAcd 10+ year member]

I looked at the RE and the lowest end subs where 200rms (to little) and the next above were 450 (to high).What if i get the Dcons and see how they sound in the ported and if they sound like crap i cant seal the box because according to the website it says they will be good in a .75 sealed? Tell me what you guys think?

 

[MrAcd 10+ year member]

I got to order tonight

 

[LosIsATool 5,000+ posts]

The choice is yours. Buy 10s that might work or 8s that will work.

 

[MrAcd 10+ year member]

The choice is yours. Buy 10s that might work or 8s that will work.

Well i dont have a choice, i already have the box for the 10's..

 

[LosIsATool 5,000+ posts]

Simple. Put a baffle on it

 

[MrAcd 10+ year member]

Simple. Put a baffle on it

a baffle? whats that and do you have a link to one for me?

 

[LosIsATool 5,000+ posts]

Lol you just put a piece of MDF over the 10 hole to fit 8s. A baffle is just the part the speakers mount to.

 

[MrAcd 10+ year member]

Lol you just put a piece of MDF over the 10 hole to fit 8s. A baffle is just the part the speakers mount to.

Okay so simple question The Skar Audio's vs the Dcon's? which would perform louder and better?

 

[LosIsATool 5,000+ posts]

If you are dead set on using 10s than neither. You will need to go with something like a JL W1. Something with a soft syspension.