What sub to mate with a Tru T-2.100?

[EazyM3 10+ year member]

The Tru can only be bridged at 400W x 1 @ 4ohms. What's a good sub to match it? I think it's true output power is ONLY 474 watts @ 4ohms.

What's an efficient sub for this type of amp? I already have a custom fiberglass enclosure that's 1.0 cuft sealed.

any ideas?

The sub must be:

12", DVC, 2ohm

1.0 cu. ft. sealed box

Click to read more...

 

[squeak9798 5,000+ posts]

Depends on your budget. Plenty of good subs that will work.

Also, why can't you use a 4ohm SVC?

 

[EazyM3 10+ year member]

a SVC 4ohm will work too... budget is around $200-$400...

BTW, I will also have DLS Iridiums 8.3's up front biamped by a Tru T-4.100. Just looking for a good SQL sub that will match my other Tru amp.

 

[wj94 10+ year member]

IDmax?

 

[EazyM3 10+ year member]

IDmax?

i was wondering either with an IDMAX 12 or a Brahma? Will the IDMAX sound okay with just 474 watts when its recommended RMS is a 1000 watts?

Will the Brahma sound better because its recommended watts is 600?

Really need to make a decision here guys....

 

[Kali77 10+ year member]

Sound Splinter 12" RL-P would be a nice fit. Or you could go with an OZ 12" ME. Like stated there are a ton of options..

Kali

 

[3.5Max6spd 10+ year member]

That kind of power is perfect for an IDQ or Arcv2 12"....

People have used as little as 400rms on IDmax's with good results, OZ ME which is rated for less than the IDmax could use that power well too.