Zed Audio had a mega bad-assed 6-channel design he was going to produce, but he couldn't get enough buyers in to start production;
This is a six channel amplifier.
Channels 1+2 and 3+4 are identical in their function. High and Low pass crossovers with the ability to run them as bandpass as well. Crossovers run from 46Hz to 5KHz at 24dB/octave.
They can be run flat as well.
Channels 5+6 are the same again but have an extra high pass crossover running from 10Hz to 50Hz to act as a subsonic filter. Again all at 24dB/octave.
The six RCA inputs also have switchable function. First 6 in 6 out, second all 6 channels from RCA inputs 1+2 and lastly chs 5+6 receiving a mono signal from the mix of 1+2+3+4 inputs. This allows the use of a 5+1 system with constant subwoofer fading.
Two current mode switches allow the user to select low or high current mode for channels 1-4 and 5-6 independently.
Pairs of channels are bridgable
There are two separate power supplies, one for channels 1-4 and the other for channels 5-6
Basic Specifications for channels 1-4
Continuous power into 4 ohms all four channels driven 100w x 4
Continuous power into 2 ohms all four channels driven 200w x 4
Continuous power into 8 ohms each pair of channels bridged 200w x 2
Continuous power into 4 ohms each pair of channels bridged 400w x 2
Switches in “High Current” mode
Continuous power into 2 ohms all four channels driven 100w x 4
Continuous power into 1 ohm all four channels driven 200w x 4
Continuous power into 4 ohms each pair of channels bridged 200w x 2
Continuous power into 2 ohms each pair of channels bridged 400w x 2
Basic Specifications for channels 5-6
Continuous power into 4 ohms both channels driven 200w x 2
Continuous power into 2 ohms both channels driven 400w x 2
Continuous power into 8 ohms channels bridged 400w x 1
Continuous power into 4 ohms channels bridged 800w x 1
Switches in “High Current” mode
Continuous power into 2 ohms both channels driven 200w x 2
Continuous power into 1 ohm both channels driven 400w x 2
Continuous power into 4 ohms channels bridged 400w x 1
Continuous power into 2 ohms channels bridged 800w x 1
