PioneerSPL1990 10+ year member
IM FER REAL!
bought these at a shop around here. got a great deal on the 3 becouse they were blown and i knew they are great canidates for custom builts. they apear to to be very similar to my memphis mojo motor but there is no split top plate.
i havent got the basket off the motor of the fully blown one yet i have to throw some heat at it. and i did some research and doubt there alumapros lol.
pics:
http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs222.snc3/20952_217753031171_550891171_3259635_6627393_n.jpg
all my **** for recone.
orion xcl motor 2.5" coil(? not sure if that the correct model something like that)
the 10"
i know the pics **** but ill try to get the sub apart later and get pics up.
the 10" needs the spyder reglued at the coil, its a really clean tare.
one 15" was ****ed the cone was ripped apart, and sypders where torn so i took out the soft parts.
the other 15" has a medium-dark coil but everything is good just needs the spyder ring glued back down.
thing that might help with identity:
the 15's had dual spyders, one on top and bottom of a ring, and the tinsels ran between the two, they were heavy guage copper. had gold push terminals, and it had a metal looking ring inserted into the subs spyder plateau that the spyders were glued to. they also had a screen in the basket vents and a 4 layer coil and the good one reads read 2.3 per coil. medium-stiff spyders. sitting on the very top landing, fat surround. silver 12 spoke basket.
i dont know a ton about TC but they have some features that i have seen on there subs.
i havent got the basket off the motor of the fully blown one yet i have to throw some heat at it. and i did some research and doubt there alumapros lol.
pics:
http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs222.snc3/20952_217753031171_550891171_3259635_6627393_n.jpg
all my **** for recone.
orion xcl motor 2.5" coil(? not sure if that the correct model something like that)
the 10"
i know the pics **** but ill try to get the sub apart later and get pics up.
the 10" needs the spyder reglued at the coil, its a really clean tare.
one 15" was ****ed the cone was ripped apart, and sypders where torn so i took out the soft parts.
the other 15" has a medium-dark coil but everything is good just needs the spyder ring glued back down.
thing that might help with identity:
the 15's had dual spyders, one on top and bottom of a ring, and the tinsels ran between the two, they were heavy guage copper. had gold push terminals, and it had a metal looking ring inserted into the subs spyder plateau that the spyders were glued to. they also had a screen in the basket vents and a 4 layer coil and the good one reads read 2.3 per coil. medium-stiff spyders. sitting on the very top landing, fat surround. silver 12 spoke basket.
i dont know a ton about TC but they have some features that i have seen on there subs.