Here are my specs. I have an Audio Art 200.2RXT capable of 600rms watts at 12v. Its crossed over at 75hz. I have one JL 12W6 version 1. The box is sealed and the dimensions are w=22" h=15" d1=8 d2=6. Around 0.95 ft^3. JL recommends 1.25ft^3 sealed and 2.25ft^3 ported. I cant go bigger then the depth that I have now. I can go up too 47in wide and 20.25in high.
The problem I have is the bass does not seem to get very low. Its very tight which is good, but it does not have much impact. Also there seems to be alot of resonation sound coming from the box. I seem to only notice the higher frequencys and they are very overpowering the rest of the bass. Its very annoying.
What can I do to fix this? Is this just a box problem?
Are there other subs with less then 6in depth that would do better? Keep in mind i am going for SQ but still want impact.
Do I need to do ported to get low?
The problem I have is the bass does not seem to get very low. Its very tight which is good, but it does not have much impact. Also there seems to be alot of resonation sound coming from the box. I seem to only notice the higher frequencys and they are very overpowering the rest of the bass. Its very annoying.
What can I do to fix this? Is this just a box problem?
Are there other subs with less then 6in depth that would do better? Keep in mind i am going for SQ but still want impact.
Do I need to do ported to get low?
